Checking Universal Replicator pair synchronization rate

You can check on the percentage of synchronized data between the P-VOL and S-VOL. The synchronization rate is displayed as follows:

• When the volume on the local storage system is a P-VOL, the initial copy progress is displayed.

• When the volume on the local storage system is an S-VOL, the synchronization rate depends on whether the pair is split:

• If the pair is not split, a hyphen (-) is displayed.

• If the pair is split, the S-VOL synchronization rate between before and after split is displayed. For example, if the S-VOL content before and after split is the same, 100 is displayed.

 If the pair is split due to initial copy failure, a hyphen (-) is displayed. If initial copy fails, the status Initial copy failed is displayed in the View Pair Properties window.

• For the following cases, a hyphen (-) is displayed:

• When the volume in the local storage system is neither a P-VOL nor an S-VOL.

• When the volume in the local storage system has one of the following pair statuses: HOLD, HOLDING, or HLDE.

Procedure

1. Open the Remote Replication window.

In Command Suite: On the Resources tab, expand the Storage Systems tree, right-click the target storage system, and click Remote Replication.

In Device Manager - Storage Navigator: In the Storage Systems tree, click Replication > Remote Replication.

2. Click the UR Pairs tab, and then select the pair whose rate you want to check.

3. Click Actions > Remote Replication > View Pair Synchronization Rate.

Clicking Refresh View displays the latest synchronization rate.