Local Storage System

Displays the following information about pair volumes in the Local Storage System.

• LDEV ID: LDEV identifier.

• LDEV Name: LDEV name.

• Pair Position: Identifies the volume as primary or secondary.

• Journal ID: Journal identifier.

• Mirror ID: Pair’s mirror ID.

• CLPR: CLPR ID.

• Virtual storage machine: Virtual storage machine’s model type and serial number.

• Virtual LDEV ID: Volume’s virtual LDEV identifier.

• Virtual Device Name: Volume’s virtual device name, in the format:

virtual emulation type/number of virtual LUSE volumes/virtual CVS attribute

- Only attributes that are specified display.

- “CVS” displays at the end of the device name, if the virtual CVS attribute is specified.

- A blank indicates no values are specified.

• Virtual SSID: Volume’s virtual SSID. A blank indicates that no virtual SSID is specified.

Copy Type

Type of pair:

• UR: Universal Replicator

• TC: TrueCopy

Status

Pair’s status. For information, see the topic on pair status definitions in the Universal Replicator User Guide.

Synchronization Rate (%)

Displayed as follows:

• When the volume on the local storage system is a P-VOL: Initial copy progress is displayed.

• When the volume on the local storage system is an S-VOL: The synchronization rate depends on whether the pair is split:

• If the pair is not split, a hyphen (-) is displayed.

• If the pair is split, the S-VOL synchronization rate between before and after split is displayed. For example, if the S-VOL content before and after split is the same, 100 is displayed.

Caution: If the pair is split due to initial copy failure, a hyphen (-) is displayed. If initial copy fails, the status Initial copy failed is displayed in the View Pair Properties window.

• If the pair volume is queued, (Queuing) is displayed.

• In the following cases a hyphen (-) is displayed:

• When the volume in the local storage system is neither a P-VOL nor an S-VOL.

• When the volume in the local storage system has one of the following pair statuses: HOLD, HOLDING, or HLDE.

Remote Storage System

Displays the following information about pair volumes in the Remote Storage System.

• Model/Serial Number: Storage system model name and serial number.

• LDEV ID: LDEV identifier.

• Journal ID: Journal identifier.

• Virtual storage machine: Virtual storage machine’s model type and serial number.

• Virtual LDEV ID: Volume’s virtual LDEV identifier.

Path Group ID

Path group identifier

Refresh

Updates the information displayed in the window.