Journal ID

Journal identifier.

Journal Type (VSP G1000, G1500, and VSP F1500)

Journal copy type, UR or URMF.

Attribute

Whether the journal is Master, Restore, or Initial (registered but no pair volumes assigned).

Number of Journal VOLs

Number of journal volumes registered in the journal, with the maximum number allowed in parentheses.

Journal Capacity

Capacity of the journal volume registered in the journal. If two journal volumes are registered, the capacity of the reserve journal volume is subtracted from the total capacity.

Number of Data VOLs

Number of volumes associated with the journal.

(VSP G1000, G1500, and VSP F1500) If the journal uses multiple mirror IDs, volumes in mirrors with Hold, Holding, or Hold(Failure) status are not included.

(VSP Gx00 models and VSP Fx00 models) With the delta resync configuration, the number of data volumes registered to the journal of the mirrors not for delta resync is displayed. The number of volumes registered to the journal of the delta resync mirrors (whose status is Hold, Holding, or Hold(Failure)) is not displayed.

Data Capacity

Total capacity of all the associated volumes.

(VSP G1000, G1500, and VSP F1500) If the journal uses multiple mirror IDs, volumes in mirrors with Hold, Holding, or Hold(Failure) status are not included.

(VSP Gx00 models and VSP Fx00 models)With the delta resync configuration, the number of data volumes registered to the journal of the mirrors not for delta resync is displayed. The number of volumes registered to the journal of the delta resync mirrors (whose status is Hold, Holding, or Hold(Failure)) is not displayed.

MP Blade ID or MP Unit ID

MP blade or unit identifier

Encryption

Journal's encryption information:

• Enabled: The journal contains only encrypted volumes.

• Disabled: The journal contains only unencrypted volumes.

• Mixed: The journal contains both encrypted and unencrypted volumes.

Note: Encryption of data is not ensured in an LDEV with the Mixed encryption status. To manage data encryption, use an LDEV in which Encryption is Enabled or Disabled.

• Hyphen (-): The pool to which the journal volume belongs is an external volume, created in a migration volume (VSP G1000, VSP G1500, and VSP F1500), or blocked.

Inflow Control

Whether flow of update data to the journal volume is restricted by slowing the response to hosts.

Data Overflow Watch

Number of seconds the system will monitor write data to the journal volume when the journal volume is full (100%). A hyphen (-) displays if Inflow Control is disabled.

Cache Mode

Whether journal data is stored in cache memory on the remote side (restore journal).

(VSP G1000, G1500, and VSP F1500)

• Enable: Journal data is stored in cache memory. When the available cache memory becomes insufficient, the journal data is also stored in a journal volume.

• Disable: Journal data is stored in a journal volume instead of cache memory.This setting is disabled in the master journal. However, this setting is enabled if you use the horctakeover command of CCI (for Universal Replicator) or the YKRESYNC REVERSE command of Business Continuity Manager (for Universal Replicator for Mainframe) to change the master journal to the restore journal.

Timer Type (VSP G1000, G1500, and VSP F1500)

URz only.

Type of clock used for consistency time. Must be the same for primary and secondary storage systems.

Mirror ID

Mirror identifier.

Attribute

Whether the journal is Master, Restore, or Initial (registered but no pair volumes assigned).

Status

Mirror’s status. For definitions, see Monitoring journal (mirror) status.

Remote Storage System

Displays the following information about the system connected to the system you accessed.:

• Model/Serial Number: Storage system model and serial number. A hyphen displays if the mirror attribute is Initial.

• Journal ID: Journal identifier. A hyphen displays if the mirror attribute is Initial.

Path Group ID

Path group identifier specified during pair creation.

Number of Data VOLs

Number of volumes associated with the journal.

(VSP G1000, G1500, and VSP F1500) If the journal uses multiple mirror IDs, volumes in mirrors with Hold, Holding, or Hold(Failure) status are not included.

(VSP Gx00 models and VSP Fx00 models) With the delta resync configuration, the number of data volumes registered to the journal of the mirrors not for delta resync is displayed. The number of volumes registered to the journal of the delta resync mirrors (whose status is Hold, Holding, or Hold(Failure)) is not displayed.

Data Capacity

Total capacity of all the associated volumes.

(VSP G1000, G1500, and VSP F1500) If the journal uses multiple mirror IDs, volumes in mirrors with Hold, Holding, or Hold(Failure) status are not included.

(VSP Gx00 models and VSP Fx00 models) With the delta resync configuration, the number of data volumes registered to the journal of the mirrors not for delta resync is displayed. The number of volumes registered to the journal of the delta resync mirrors (whose status is Hold, Holding, or Hold(Failure)) is not displayed.

Remote Command Device

LDEV number of the remote command device if it is assigned to the mirror.

• The column is blank if the remote command device is not assigned to the mirror.

• A hyphen (-) indicates the remote command device cannot be assigned to the mirror.

CTG ID*

Mirror’s consistency group identifier. A hyphen indicates there is no consistency group.

CTG Utilization*

Whether the consistency group is shared by multiple storage systems.

• Single: The consistency group consists of a single pair of primary and secondary storage systems.

• Multi: The consistency group consists of multiple storage systems.

EXCTG Setting* (VSP G1000, G1500, and VSP F1500)

Displays the EXCTG ID and Super DKC (device name and serial number).

A hyphen (-) displays when no journal is registered in the EXCTG.

Path Watch Time*

Interval from the time a path becomes blocked to the time when the mirror is suspended. A hyphen indicates if the status of the secondary mirror on the primary storage system is Hold, Holding or Hold(Failure).

Path Watch Time Transfer*

Whether to assign the master journal’s Path Watch Time value to the restore journal.

When transferred, the Path Watch Time values of the mirror's primary side (MCU) and the secondary side (RCU) will be consistent.

• Yes: Path Watch Time value will be transferred to the mirror's secondary side (RCU).

• No: Path Watch Time value will not be transferred to the mirror's secondary side (RCU).

Copy Pace*

Pace for copying data during initial copy: Slower (default), Medium, Faster. A hyphen indicates that the journal is a restore journal.

Transfer Speed*

Data transfer line speed in Mbps (megabits per second): 3, 10, 100, or 256.

Delta Resync Failure*

Processing that takes place in the event of delta resync operation failure Entire Copy, No Copy.

• Entire Copy: The entire P-VOL is copied to the S-VOL.

• No Copy: No processing occurs. The S-VOL is not updated.

Split Mirrors

Opens the Split Mirrors window.

Resync Mirrors

Opens the Resync Mirrors window.

Create UR Pairs

Opens the Create UR Pairs window

More Actions

When clicked, opens a menu for accessing:

• Edit Mirror Options window

• View Remote Connection Properties window

• Delete Mirrors window

• Assign Remote Command Devices window

• Release Remote Command Devices window

• Export window

*These items do not appear in the table by default. To display these items, you must change the column settings for the table (click Column Settings).

LDEV ID

Journal volume’s identifier consisting of the LDKC number, CU number, and LDEV number. Clicking the link opens the LDEV Properties window.

LDEV Name

Name of the journal volume’s LDEV.

Pool Name (ID)

Identifier consisting of the pool name and the pool ID. Clicking the link opens a window with pool information.

RAID Level

Type of RAID implementation for the journal volume.

Capacity

Journal volume’s capacity.

CLPR

Journal volume’s CLPR. The CLPR ID is displayed before the colon, and the CLPR name is displayed after the colon.

Encryption*

Encryption information:

• Enabled: Encryption of the parity group to which the LDEV belongs is enabled, or a V-VOL is associated with a pool in which a pool volume has encryption enabled.

• Disabled: Encryption of the parity group to which the LDEV belongs is disabled, or a V-VOL is associated with a pool in which a pool volume has encryption disabled.

• Mixed: The pool to which the LDEV belongs contains both pool volumes for which encryption is enabled and pool volumes for which encryption is disabled.

Note: Encryption of data is not ensured in an LDEV with the Mixed encryption status. To manage data encryption, use an LDEV in which Encryption is Enabled or Disabled.

• Hyphen (-): The LDEV is an external volume. For DP-VOL, the pool to which the LDEV belongs is either an external volume or blocked.

Resource Group Name (ID)

LDEV’s resource group name and identifier. The ID is enclosed in parentheses.

Type

Type of journal volume:

• Journal: Journal volume

• Reserve Journal: Reserve journal volume

Assign Journal Volumes

Opens the Assign Journal Volumes window.

Export

Opens the window for exporting table information

*This item does not appear in the table by default. To display this item, you must change the column settings for the table (click Column Settings).