Primary Volume

The P-VOL information.

Values:

• LDEV ID: The P-VOL's LDEV identification number. Click to open the LDEV Properties window. Use this window to search for P-VOL information.

• LDEV Name: The P-VOL's LDEV name.

• CLPR: The P-VOL's CLPR ID.

• Virtual Storage Machine: The model type and serial number of the virtual storage machine to which the P-VOL belongs.

• Virtual LDEV ID: The identification number of the P-VOL’s virtual LDEV. If no virtual LDEV ID is assigned, a blank is displayed.

• Virtual Device Name: The name of the P-VOL’s virtual device, in a combined format of "virtual emulation type", "number of virtual LUSE volumes", and "virtual CVS attribute". Each of these three items is displayed only if it is specified. If none of them are specified, a blank is displayed.

• Virtual SSID: The virtual SSID of the P-VOL. If no virtual SSID is specified, a blank is displayed.

Copy Type

The SI volume’s copy type.

Values:

• SI-L1: SI L1 pair

• SI-L2: SI L2 pair

• SIMF: SIz pair

Snapshot Group

The HTI snapshot group name.

If you have not configured a snapshot group for the HTI pair, this item is blank.

Status

The pair status.

Synchronization Rate (%)

For SI

• If the pair status is COPY(PD)/COPY, COPY(SP)/COPY, or PSUS (SP)/PSUS, the copy progress rate is displayed.

• If the pair status is PAIR, PSUS, COPY(RS-R)/RCPY, or PSUE, the synchronization rate between P-VOL and S-VOL is displayed.

• If the pair status is COPY(RS)/COPY changed from PSUE, the copy progress rate is displayed.

• If the pair status is COPY(RS)/COPY changed from other than PSUE, the synchronization rate between P-VOL and S-VOL is displayed.

• If the pair status is SMPL(PD), a hyphen is displayed.

SIz:

• If the pair status is PENDING, SP-Pend/TRANS, or V-Split/SUSPVS, the copy progress rate is displayed.

• If the pair status is DUPLEX, Split/SUSPOP, Resync-R/REVRSY, or Suspend/SUSPER, the synchronization rate between P-VOL and S-VOL is displayed.

• If the pair status is Resync/PENDING, changed from Suspend/SUSPER, the copy progress rate is displayed.

• If the pair status is Resync/PENDING, changed from other than Suspend/SUSPER, the synchronization rate between P-VOL and S-VOL is displayed.

• If the pair status is Deleting/TRANS, a hyphen is displayed.

For Thin Image pairs where the cascade attribute is disabled, the rate at which the Thin Image S-VOL matches the next new generation of the S-VOL. If the S-VOL is the latest one, the storage system computes the synchronization rate by comparing the S-VOL with the P-VOL.

For Thin Image pairs where the cascade attribute is enabled, the following information is displayed depending on the pair status:

• The pair status is PAIR, PSUS, or PSUE. The pair synchronization rate shows the rate that current S-VOL data matches that of the next generation of the S-VOL. If the S-VOL is the latest one, the synchronization rate is computed by comparing the S-VOL with the P-VOL.

• The pair status is COPY, PSUS(SP), RCPY, or SMPL(PD). The progress rate of each process is displayed.

Secondary Volume

The S-VOL information.

Values:

• LDEV ID: The S-VOL's LDEV identification number. Click to open the LDEV Properties window.

• LDEV Name: The S-VOL's LDEV name.

• CLPR: The S-VOL's CLPR ID.

• Virtual Storage Machine: The model type and serial number of the virtual storage machine to which the S-VOL belongs.

• Virtual LDEV ID: The identification number of the S-VOL’s virtual LDEV. If no virtual LDEV ID is assigned, a blank is displayed.

• Virtual Device Name: The name of the S-VOL’s virtual device, in a combined format of "virtual emulation type", "number of virtual LUSE volumes", and "virtual CVS attribute". Each of these three items is displayed only if it is specified. If none of them are specified, a blank is displayed.

• Virtual SSID: The virtual SSID of the S-VOL. If no virtual SSID is specified, a blank is displayed.

Mirror Unit

The mirror unit number.

Cascade

(VSP G1000, G1500, and VSP F1500)

Indicates whether a cascaded pair can be created

• Enabled: Cascaded pairs can be created.

• Disabled: Cascaded pairs cannot be created.

A hyphen (-) is displayed for non-HTI pairs.

Type

(VSP G1000, G1500, and VSP F1500)

The pair type.

• Snapshot: A pair with the snapshot attribute.

• Clone: A pair with the clone attribute.

A hyphen (-) is displayed for non-HTI pairs.

Topology ID

(VSP G1000, G1500, and VSP F1500)

The topology ID, which indicates the layer of the pair based on the mirror unit. The topology ID consists of the LDEV ID of the volume (root volume for Thin Image pairs) and the mirror unit number.

Refresh button

Click to update the information in this table.