Restoring HDvM - SN configuration files

You can use a saved copy of a configuration file to restore the active configuration file if it becomes necessary, or to configure a replacement SVP if one fails.

Before you begin

• You must have the Storage Administrator (Initial Configuration) role to perform this task.

• You must be logged into the SVP.

• The SVP is configured so that the service does not start automatically when starting the system. See the Hardware Reference Guide for your storage system model for information about the SVP configuration method.

Procedure

1. Close all Device Manager - Storage Navigator sessions.

2. Open a command prompt window with administrator permissions.

3. Enter the following command:

C:\MAPP\wk\Supervisor\MappIniSet\MappRestore.bat absolute-path-of-backup-file

• The backup file must be in .tgz format.

• A space is required between MappRestore.bat and the path to the backup file.

4. A completion message displays. Click any key to continue.

5. Close the command prompt window.

6. Set the service to run automatically when starting the SVP. Then reboot the SVP.