@(#) RAID Manager Ver 01-23-03/08 ****************** Welcome to RAID Manager Ver 01-23-03/08 ******************* * * * Software Attached Documents (c) 1997-2009,Hitachi,LTD. * * * * * * Hitachi,LTD. * * Disk Array Systems Division * ******************************************************************************** [NOTE]: When you uses the following software for backup etc,please install RAID Manager/LIB of '../RL' directory under on the CD. - Enterprise SnapShot software which is provided by BMC. - RAID management software which is provided by HP or other ISV. 1.Introduction This attached document is describing as for the supported contents by the following program products. - RAID Manager for Solaris - RAID Manager for Solaris/x86 - RAID Manager for HP-UX - RAID Manager for AIX - RAID Manager for WindowsNT - RAID Manager for WindowsNT/x64 - RAID Manager for Linux - RAID Manager for Linux/IA64 - RAID Manager for Tru64 UNIX (Digital UNIX) - RAID Manager for IRIX 2.Prerequisite operating system and Applying machine (1) Operating system - Solaris 2.5 or higher on the SUN SPARC or SUN ULTRA Series Server - Solaris 10 or higher on the Pentium/EM64T or Compatible Processor - HP-UX10.20 or higher on the HP9000 Series or HITACHI 9000/V - AIX 4.3 or higher on the RS6000 Series Server - WindowsNT 4.0 or higher on the Pentium or Compatible Processor - Windows2000 or higher on the Pentium or Compatible Processor - Windows2003 or higher on the Pentium/EM64T/Itanium or Compatible Processor - Windows2008 or higher on the Pentium/EM64T/Itanium or Compatible Processor - Digital UNIX 4.0 or higher on the Alpha Server Models - Tru64 UNIX 5.0 or higher on the Alpha Server Models - Red Hat Linux 6.0/7.0/8.0 or higher on the Pentium or Compatible Processor AS/ES 2.1 or higher on the Pentium or Itanium or Compatible Processor AS/ES 3.0 Update2 or higher on the Itanium or Compatible Processor AS/ES 4.0/5.0 or higher on the EM64T/Itanium or Compatible Processor For only "RAID Manager for Linux" on IA64, "ia32el" and "Compatibility Layer Disc" must be installed. - IRIX64 6.5 or higher on the origin 2000 Series (2) Microcode for the RAID - RAID300: 52-47-xx or higher - RAID400: 01-16-00 or higher - RAID450: 21-10-00 or higher - RAID500: 50-09-35 or higher - RAID600: 60-01-30 or higher - DF500 for Fibre : 0558/A(05-58-00/00 in use raidqry) or higher - DF500 for SCSI : 0508/A(05-08-00/00 in use raidqry) or higher - DF600 for Fibre : 0657/A(06-57-00/00 in use raidqry) or higher - DF700 for Fibre : 0710/A(07-10-00/00 in use raidqry) or higher - DF800 for Fibre : 0852/A(08-52-00/00 in use raidqry) or higher 3.Reference program - None 4.Supporting function contents from Ver. 01-23-03/07 - None 5.Revision contents from Ver. 01-23-03/07 This version has changed as follows. - Added 'USE_MOUNTVOL_P=1' variable to avoid mountvol problem on Windows2008. - Avoided a problem that HORCM has hung-up due to receive Signal 39 on AIX. - Changed permission of UNIX domain socket because of a problem of security. For compatibility to OLD version: - gives a permission to /HORCM/.uds - starts horcmstart.sh .. with 'HORCM_EVERYCLI=1' variable 6.Restriction subject - None 7.Remarks in use - None 8.Software manual list please refer to the following manual for your using this program product. - Manual name : RAID Manager Basic Specifications - Materials number : K6601877 Rev67 - Publishing years : Feb.2009 9.Installation on the UNIX System These program products are placed to the following directory under with "cpio" format. [Example for HP-UX] - RAID Manager/HORC for HP-UX ---> ./program/RM/HP_UX/RMHORC ('./' is mounted point) The following procedures are manual installation. Please use 'RMinstsh' & 'RMuninst' script for automatically installation. 9.1 Procedure for New Introduction - Change a current directory to a specification directory. # cd /'Specification Directory' - Installs to 'Specification Directory' using "cpio" command. # cpio -idmu < ./program/RM/HP-UX/RMHORC - Makes symbolic link for /HORCM. # ln -s /'Specification Directory'/HORCM /HORCM - Executes the RAID Manager installation command. # /HORCM/horcminstall.sh 9.2 Procedure for Version Up Please confirms whether HORCM has performing or not. If HORCM has performing,then stop by using horcmshutdown.sh. - In case of 1 instance configuration of HORCM # horcmshutdown.sh - In case of multiple instances configuration of HORCM # horcmshutdown.sh 0 1 ... Also If HORC commands has performing in the interactive mode, then terminates these commands by using "-q"option. (1)Procedure for Version Up - Change a current directory to a root directory. # cd / - Installs to disk using "cpio" command. # cpio -idmu < ./program/RM/HP-UX/RMHORC - Executes the RAID Manager installation command. # /HORCM/horcminstall.sh 9.3 Version confirmation after Installation After new introduction or version-up,please confirms version information (Ver & Rev) by using the following command. [Display example] # raidqry -h Model : RAID-Manager/HP-UX Ver&Rev : 01-23-03/08 Usage : raidqry [options] 9.4 Uninstallation Procedure Deletion of a program product does in following procedure. Please refer to section 9.2 for confirming whether HORCM has performing. - Executes an uninstallation command. # /HORCM/horcmuninstall.sh - Change a current directory to a root directory. # cd / - Deletes symbolic link for /HORCM. /HORCM is symbolical linked to /'Installed directory'/HORCM. # rm /HORCM - Deletes a program product by using "rm" command. # rm -rf /'Installed directory'/HORCM 10.Installation on the WindowsNT System These program product are placed to the following directory. - RAID Manager/HORC for WindowsNT ---> ./program/RM/WIN_NT/RMHORC ('./' is mounted point) If network(TCP/IP) has no establishment then installs a network of WindowsNT attachment,and adds TCP/IP protocol,too. 10.1 Procedure for New Introduction - Executes Setup.exe of under ./program/RM/WIN_NT/RMHORC directory. 10.2 Procedure for Version Up Please confirms whether HORCM has performing or not. If HORCM has performing,then stop by using horcmshutdown.exe. - In case of 1 instance configuration of HORCM C:\HORCM\etc> horcmshutdown - In case of multiple instances configuration of HORCM C:\HORCM\etc> horcmshutdown 0 1 ... Also If HORC commands has performing in the interactive mode, then terminates these commands by using "-q"option. (1)Procedure for Version Up - Delete the installed RAID Manager by using "Addition and deletion of application" of the control panel. - Executes Setup.exe of under ./program/RM/WIN_NT/RMHORC directory. 10.3 Version confirmation after Installation After new introduction or version-up,please confirms version information (Ver & Rev) by using the following command. [Display example] C:\HORCM\etc> raidqry -h Model : RAID-Manager/WindowsNT Ver&Rev : 01-23-03/08 Usage : raidqry [options] 10.4 Uninstallation Procedure Deletion of a program product does in following procedure. Please refer to section 10.2 for confirming whether HORCM has performing. - Delete the installed RAID Manager by using "Addition and deletion of application" of the control panel.