ENTITYTRAP/2/BOARDFAIL: OID [oid] Card become failure for some reason.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], EntityTrapEntType= [INTEGER], PhysicalName="[OCTET]", EntityTrapFaultID=[INTEGER])
An exception occurs on the card.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.2.3.3 |
Critical |
equipmentAlarm(5) |
| Name | Meaning |
|---|---|
OID |
Indicates the ID of a MIB object. |
Index |
Indicates the entity index. |
EntityPhysicalIndex |
Indicates the index of the physical entity. |
EntityTrapEntType |
Indicates the entity type. |
PhysicalName |
Indicates the physical entity name. |
EntityTrapFaultID |
Indicates the error code. |
Error Code |
Possible Cause |
|---|---|
132645 |
The disk link is faulty. |
132640 |
The CPU is faulty. |
132623 |
The NP chip is faulty. |
132103 |
The voltage failed. |
132620 |
The power supply is faulty. |
132619 |
The corrosion protection circuit is faulty. |
132618 |
An overall fault occurs on the NP chip. |
132149 |
The bad block rate for the NAND flash exceeds the threshold. |
2125827 |
The temperature sensor is abnormal. |
132865 |
The RTC was abnormal.
NOTE:
When the RTC is faulty, the system time may be incorrect after the device is restarted. However, services indifferent to system timing are not affected. If an NTP server is available on the network, the system time will be corrected after you enable the NTP client function on the device. |
132146 |
The PSE power supply is faulty. |
132121 |
The current on the USB flash drive exceeds the upper limit. |