ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.5 hwBoardInvalid

Description

ENTITYTRAP/4/BOARDINVALID: OID [oid] Board is invalid for some reason.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType= [INTEGER], EntityTrapFaultID=132624, EntityTrapReasonDescr="[OCTET]")

The board fails.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.2.5	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
Index	Indicates the entity index.
EntityPhysicalIndex	Indicates the physical entity index.
EntPhysicalName	Indicates the name of the physical entity.
EntityTrapEntType	Indicates the type of the physical entity, such as mpu(1), and lpu(2).
EntityTrapFaultID	Indicates the error code.
EntityTrapReasonDescr	Indicates the description of the alarm cause.

Impact on the System

Services will be interrupted.

Possible Causes

Error Code	Possible Cause
132148	The optical module is abnormal.
132614	The logic of the CPLD on the card is abnormal.
132629	The PHY chip is abnormal.
132624	The ECC detects a memory error.

Procedure

Check whether the faulty board is registered successfully and services are running properly.
Run the display device command to check whether the faulty board is registered successfully, and run the display interface command to view the statistics on received and sent packets. According to the statistics, check whether services are running properly.
- If the faulty board is registered successfully and services are running properly, no action is required.
- If the faulty board is unregistered or services are not running properly, go to step 2.
If the faulty board is a main control board, run the reboot command to reboot the device. Then check whether the device is working properly.
- If the board can be registered successfully and services are running properly, no action is required.
- If the board cannot be registered or services cannot run properly, the board hardware is faulty. Replace this board.
- If the fault persists, go to step 3.
Contact technical support personnel.

Related Information

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.6 hwBoardInvalidResume 132614