POE_1.3.6.1.4.1.2011.5.25.195.40.10 hwPoePdClassInvalid

Description

POE/4/PDINVALIDCLASS: OID [oid] PD with invliad IEEE class and power denied.(IfIndex=[INTEGER], Interface="[OCTET]")

The system detects that the PD class is invalid and does not provide power for PDs.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.10	Warning	communicationsAlarm(2)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
IfIndex	Indicates the interface index.
Interface	Indicates the interface name.

Impact on the System

Services are not affected.

Possible Causes

Cause 1: The PD may not comply with standards, whereas the switch supports 802.3af and 802.3at. In this case, the PD class cannot be identified by the switch.

Cause 2: The PD hardware is faulty.

Procedure

Run the poe legacy enable command on the interface to enable compatibility detection. Then check whether the alarm is cleared.
- If yes, go to step 3.
- If not, go to step 2.
Replace the PD complying with standards.
End.

Related Information

None