POE_1.3.6.1.4.1.2011.5.25.195.40.11 hwPoePdClassOvercurrent

Description

POE/4/PDCLASSOVERCURRENT: OID [oid] has detected a classfication overcurrent PD and power denied.(IfIndex=[INTEGER], Interface="[OCTET]")

The system detects that overcurrent occurs during PD classification and does not provide power for PDs.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.11	Warning	communicationsAlarm(2)

Name	Meaning
OID	Indicates the ID of the MIB object.
IfIndex	Indicates the interface index.
Interface	Indicates the interface name.

Services are not affected.

The PD does not comply with standards.

You can run the poe high-inrush enable slot slot-id command in the system view to configure an interface to allow generation of the high pulse current. Then check whether the alarm is cleared.
- If yes, go to step 4.
- If not, go to step 2.
Replace the PD and check whether the alarm is cleared.
- If yes, go to step 4.
- If not, go to step 3.
Contact technical support personnel.
End.

None