WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.66 hwApPoePdClassOvercurrentTrap

Description

WLAN/4/AP_POE_PD_CLASS_OVER_CURRENT:OID [oid] A port detects a PD whose current exceeds the threshold of the corresponding class. (APMAC=[OPAQUE], APName=[STRING], ApIfIndex=[INTEGER], ApEntityPhysicalName=[OCTET], APID=[INTEGER])

The system detects that overcurrent occurs during PD classification and does not provide power for PDs.

Only the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP7052DN, AP7152DN, AD9430DN-24, AD9431DN-24X and AD9430DN-12 support this alarm.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.66	Warning	communicationsAlarm(2)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the AP's MAC address.
APName	Indicates the AP name.
ApIfIndex	Indicates the AP interface index.
ApEntityPhysicalName	Indicates the AP interface name.
APID	Indicates the AP ID.

Impact on the System

Services are not affected.

Possible Causes

The PD does not comply with standards.

Procedure

You can run the poe high-inrush enable (AP system profile view) command in the AP system profile view to configure an interface to allow generation of the high pulse current. Then check whether the alarm is cleared.
- If yes, go to step 4.
- If not, go to step 2.
Replace the PD and check whether the alarm is cleared.
- If yes, go to step 4.
- If not, go to step 3.
Contact technical support personnel.
End.

Related Information

None