WLAN_1.3.6.1.4.1.2011.6.139.15.1.1.3 hwWlanWidsNonWifiDetTrap

Description

WLAN/4/WIDS_DETECT_NON_WIFI_DEVICE:OID [oid] Detected non-wifi-device. (DetectAPMAC=[OPAQUE], DetectAPName =[OCTET], DetectRadioID=[INTEGER], DetectRadioType=[INTEGER], NonWifiDevType=[INTEGER], NonWifiRssi=[OCTET], NonWifiChannel=[OCTET], APID=[INTEGER])

This alarm is generated when a non-Wi-Fi device is detected.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.15.1.1.3	Warning	environmentalAlarm (6)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
DetectAPName	Indicates the name of a monitoring AP.
DetectAPMAC	Indicates the MAC address of a monitoring AP.
DetectRadioID	Indicates the radio ID of a monitoring AP.
DetectRadioType	Indicates the radio type of a monitoring AP. 0: 2.4 GHz 1: 5 GHz
NonWifiDevType	Indicates the type of an interference device. 0: cordless phone 1: cordless phone base 2: ZigBee device 3: microwave oven 4: Bluetooth device 5: game controller 6: 2.4 GHz wireless video and audio device 7: 5 GHz wireless video and audio device 8: baby monitor
NonWifiRssi	Indicates the RSSI of the interference source.
NonWifiChannel	Indicates the channel of the interference source.
APID	Indicates the AP ID.

Impact on the System

If the positioning function is enabled on the AP, the AP reports detected interference sources to the positioning server.

Possible Causes

Non-Wi-Fi interference sources are detected during spectrum analysis.

Procedure

Find the interference device according to the identified interference device type and remove the interference. Then, check whether the alarm persists.
- If so, go to Step 2.
- If not, go to Step 3.
Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
End.

Related Information

None.