LACP_1.3.6.1.4.1.2011.5.25.41.3.35 hwLacpPDUChange

Description

LACP/2/PDUC: OID [oid] The LACP member interface's status changed from selected to unselected due to the PDU change. (TrunkIndex=[INTEGER], PortIfIndex=[INTEGER], TrunkId=[INTEGER], TrunkName=[OCTET], PortName=[OCTET], OldPduInfo=[OCTET], NewPduInfo=[OCTET], ReasonCode=[OCTET])

The status of a member interface of an Eth-Trunk interface in static LACP mode changed from selected to not selected due to an LACPDU change.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.41.3.35

Major

other

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

TrunkIndex

Index of an Eth-Trunk interface in static LACP mode.

PortIfIndex

Index of a member interface of an Eth-Trunk interface in static LACP mode.

TrunkId

ID of an Eth-Trunk interface in static LACP mode.

TrunkName

Name of an Eth-Trunk interface in static LACP mode.

PortName

Name of a member interface of an Eth-Trunk interface in static LACP mode.

OldPduInfo

Original LACPDU.

NewPduInfo

New LACPDU.

ReasonCode

Reason for the LACPDU change.

Impact on the System

The member link cannot carry services.

Possible Causes

Cause 1: Actor system ID changed in the received PDU

Procedure

  1. Run the display interface brief command to check whether the member interface is Down.

    • If the interface is Down, go to Step 2.

    • If the interface is Up, go to Step 4.

  2. Run the undo shutdown command and check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 10.

    • If the alarm persists, go to Step 3.

  3. Check whether the physical link connecting to the member interface is faulty.

    • If the physical link is faulty, go to Step 7.

    • If the physical link is not faulty, go to Step 4.

  4. Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] ] command to check whether the remote Eth-Trunk has member interfaces.

    • If the remote Eth-Trunk has member interfaces, go to Step 5.

    • If the remote Eth-Trunk does not have member interface, go to Step 8.

  5. Run the display trunkmembership eth-trunk trunk-id command to check whether the minimum number of member interfaces that are in the Up state is configured and appropriate.

    • If the minimum number of member interfaces that are in the Up state is inappropriate, go to Step 6.

    • If the minimum number of member interfaces that are in the Up state is not configured, go to Step 9.

  6. Run the least active-linknumber link-number command in the Eth-Trunk interface view to configure an appropriate minimum number of member interfaces that are in the Up state. Then, check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 10.

    • If the alarm persists, go to Step 9.

  7. Repair the physical link and check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 10.

    • If the alarm persists, go to Step 4.

  8. Run the eth-trunk trunk-id command in an interface view to add the interface to the Eth-Trunk and check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 10.

    • If the alarm persists, go to Step 5.

  9. Collect alarm information and configuration information, and then contact technical support personnel.
  10. End.

Related Information

LACP_1.3.6.1.4.1.2011.5.25.41.3.36 hwLacpPDUChangeResume

Parent Topic: LACP
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >