RM_1.3.6.1.4.1.2011.5.25.145.25.1 hwNhmRestrain

Description

RM/2/RM_NHM_RESTRAIN:OID [oid] Cyclic iteration was suppressed. (Type=[Integer], key=[Integer], VpnInstanceName=[octet], Nexthop=[octet])

Cyclic iteration was suppressed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.145.25.1

Major

qualityOfServiceAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Type

Type of cyclic iteration that is suppressed

key

Key of cyclic iteration that is suppressed

VpnInstanceName

Name of the VPN to which the next hop obtained after iteration belongs

Nexthop

Next hop obtained after iteration

Impact on the System

The CPU usage will remain high if the cyclic iteration problem is not resolved.

Possible Causes

Cause 1:

A configuration error occurred.

Cause 2:

An error occurred in network deployment.

Cause 3:

BGP packets were modified.

Procedure

  1. Perform the following operation based on the value of the Type parameter:

    • If the value is 1 (route iteration) or 2 (tunnel iteration), run the display ipv4 nexthop-indirection command to check the IPv4 next hop information.

    • If the value is 3 (IPv6 route iteration), run the display ipv6 nexthop-indirection command to check the IPv6 next hop information.

    Check the value of the Protocol field.
    • If the value is BGP, run the display bgp nexthop ipv4-address command, collect all the displayed information, and contact technical support personnel. The ipv4-address parameter indicates the IP address of the next hop with cyclic iteration.
    • If the value is not BGP, contact technical support personnel.

Related Information

RM_1.3.6.1.4.1.2011.5.25.145.25.2 hwNhmRestrainClear

Parent Topic: RM
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >