WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.106 hwApPowerLimitedTrap

Description

WLAN/4/AP_POWER_LIMITED:OID[oid] The AP works in Limited mode due to insufficient power supply.(APMAC=[OPAQUE], APName=[STRING], PowerWorkMode=[OCTET], ExpectPowerWorkMode=[OCTET], APID=[INTEGER])

The AP power supply is insufficient and the AP works in Limited mode.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.106	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
PowerWorkMode	Indicates the actual power supply mode of an AP.
ExpectPowerWorkMode	Indicates the expected power supply mode of an AP.
APID	Indicates the AP ID.

Impact on the System

When an AP works with low power consumption, some component functions such as the USB and PoE out functions are disabled. In addition, radio power is reduced, or radios are disabled.

For details about the impact, Visit Info-Finder, select a product series, and view hardware specifications in the hardware center. You can check the power supply downgrade limits at different power supply levels.

Possible Causes

The PSE of the AP failed to meet the power supply requirements of the AP.

Procedure

Run the lldp enable command in the interface view to enable the LLDP function. In this way, the peer PSE device can identify the power supply standard of the local PD and supply power as required.
- If the alarm persists, go to Step 2.
- If the alarm is cleared, go to Step 4.
Check the peer PSE and ensure that the power supply standard meets the AP's power supply requirements.
- If the alarm persists, go to Step 3.
- If the alarm is cleared, go to Step 4.
Collect alarm and configuration information, and contact technical support personnel.
End.

Related Information

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.107 hwApPowerLimitedResumeTrap