WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.94 hwApPowerInsufficientTrap

Description

WLAN/2/POWER_INSUFF:OID [oid] AP power supply is insufficient.(APMAC=[OPAQUE], APName=[STRING], PowerWorkMode=[OCTET], ExpectPowerWorkMode=[OCTET], APID=[INTEGER], Impact=[OCTET])

The AP power supply was insufficient.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.94	Major	equipmentAlarm (5)

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
PowerWorkMode	Indicates the actual power supply mode of an AP.
ExpectPowerWorkMode	Indicates the expected power supply mode of an AP.
APID	Indicates the AP ID.
Impact	Indicates the impact of insufficient AP power supply.

Impact on the System

Insufficient AP power supply may lead to the following problems:

The AP restarts.
The USB function is unavailable.
The USB power is reduced to 2.5 W.
The IoT function is unavailable.

Possible Causes

The AP power supply was insufficient.

Procedure

Run the lldp enable command in the interface view to enable the LLDP function. In this way, the peer power supply device can identify the power supply standard of the local device and supply power as required.
- If the alarm persists, go to Step 2.
- If the alarm is cleared, go to Step 4.
Check the peer power supply device and ensure that the power supply standard meets the AP's power supply requirements.
- If the alarm persists, go to Step 3.
- If the alarm is cleared, go to Step 4.
Run the power force work-mode { af | at | bt60 | bt90 } command in the AP system profile view to adjust the AP power supply mode.
Collect alarm and configuration information, and contact technical support personnel.
End.

Related Information

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.95 hwApPowerInsufficientResumeTrap