WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.16 hwRadioNotSupportChannelTrap

Description

WLAN/4/AP_UNSUPPORT_CHANNEL:OID [oid] AP not support configured channel notify.(APMAC=[MacAddress],RadioID=[INTEGER], APName=[OCTET], CONFIGURED BANDWIDTH=[INTEGER], CONFIGURED CHANNEL1=[INTEGER], CONFIGURED CHANNEL2=[INTEGER], ACTUAL BANDWIDTH=[INTEGER], ACTUAL CHANNEL1=[INTEGER], ACTUAL CHANNEL2=[INTEGER], REASON=[OCTET], APID=[INTEGER])

An AP does not support the channels delivered by the AC.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.16.1.1.1.16	Warning	processingErrorAlarm(4)

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APMAC	Indicates the MAC address of an AP.
RadioID	Indicates the radio ID of the AP.
APName	Indicates the AP name.
CONFIGURED BANDWIDTH	Indicates the configured bandwidth.
CONFIGURED CHANNEL1	Indicates the configured channel.
CONFIGURED CHANNEL2	Indicates the configured second channel.
ACTUAL BANDWIDTH	Indicates the actual bandwidth.
ACTUAL CHANNEL1	Indicates the actual channel.
ACTUAL CHANNEL2	Indicates the actual second channel.
REASON	Indicates the alarm reason.
APID	Indicates the AP ID.

Impact on the System

The AP still operates on the previously configured channels, and the channel configuration delivered by the AC does not take effect.

Possible Causes

The AP does not support the channels delivered by the AC.

Procedure

Check whether the AP goes online on a WDS or Mesh network.
- If so, the AP does not support channel delivery. Go to Step 4.
- If not, go to Step 2.
Check the channels supported by the AP. Run the channel { 20mhz | 40mhz-minus | 40mhz-plus | 80mhz | 160mhz } channel or channel 80+80mhz channel1 channel2 command to change the channels configured for the AP. Then, check whether the alarm persists.
- If so, go to Step 3.
- If not, go to Step 4.
Collect alarm messages, log messages, and configurations, and then contact technical support personnel.
End.

Related Information

None