ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.3 hwOpticalFail

Description

ENTITYTRAP/2/OPTICALFAIL: OID [oid] Optical Module become failure.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapFaultID=[INTEGER])

Optical module detection failed.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.4.3	Major	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
Index	Indicates an index.
EntityPhysicalIndex	Indicates a physical index.
PhysicalName	Indicates the entity name.
EntityTrapFaultID	Indicates the error code.

Impact on the System

The interface that has the optical module installed may fail to go Up.

Possible Causes

Cause 1:

No cable or optical module was detected.

Cause 2:

The cable type was detected but the specific type cannot be identified. For example, whether the cable is active is passive and the cable length cannot be identified.

Cause 3:

The cable does not comply with interface specifications.

Procedure

Run the display transceiver interface interface-type interface-number command to check whether Transceiver Type matches the interface type. For example, a GE interface needs to use an optical module that provides the GE rate.
- If so, go to step 2.
- If not, replace the optical module with one that matches the interface type.
Check whether the optical module is a Huawei-certified switch one.
- If so, collect alarm information and configuration information, and then contact technical support personnel.
- If not, replace the optical module with a Huawei-certified switch one.

Related Information

Entitytrap_1.3.6.1.4.1.2011.5.25.219.2.4.4 hwOpticalFailResume