WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.29 hwApNotSupportCountryCodeTrap

Description

WLAN/4/AP_UNSUPPORT_COUNTRY_CODE:OID [oid] AP not support configured country code notify.(APMAC=[MacAddress], APName=[STRING], APLockCountryCode=[OCTET], APID=[INTEGER], ConfigCountryCode=[OCTET])

The AP does not support the country code configured on the device.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.29	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
APLockCountryCode	Indicates the country code locked on the AP. If the AP supports multiple country codes, a hyphen (-) is displayed.
APID	Indicates the AP ID.
ConfigCountryCode	Indicates the country code configured for the AP.

Impact on the System

The AP cannot get online.

Possible Causes

A country code not supported by the AP is configured on the device.

Procedure

Run the display regulatory-domain-profile and display ap run-info commands to check whether the country code configured on the device is the same as that supported by the AP.
- If the country codes are the same, go to Step 3.
- If the country codes are different, go to Step 2.
Run the country-code country-code command to set the country code on the device to the one supported by the AP.
- If the alarm persists, go to Step 4.
- If the alarm is cleared, go to Step 5.
Collect alarm messages, log messages, and configurations, and then contact technical support personnel.
End.

Related Information

None