WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.9 hwApMemoryOverloadTrap

Description

WLAN/4/AP_MEM_OVERLOAD: OID [oid] AP memory overload notify.(APMAC=[OPAQUE], APName=[STRING], ApMemRate=[INTEGER], APID=[INTEGER])

The AP's memory usage exceeds the upper threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.9	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
oid	Indicates the ID of a MIB object.
APMAC	Indicates the AP's MAC address.
APName	Indicates the AP name.
ApMemRate	Indicates the AP's memory usage.
APID	Indicates the AP ID.

Impact on the System

The memory usage exceeds the upper threshold. If the threshold is not high (for example, 50% or 60%), services are not affected. If the threshold is high (for example 90%), the AP reports the alarm, and packet loss may occur on the AP or the AP may be disconnected.

Possible Causes

Cause 1: The memory alarm threshold is low.

Cause 2: The device provides too many services.

Procedure

Run the display ap-system-profile command to check the alarm threshold for memory usage. Check whether the alarm threshold is set properly.
- If so, go to step 3.
- If not, go to step 2.
Run the memory-usage threshold command to set a proper alarm threshold for memory usage. After that, check whether the alarm persists.
- If the alarm persists, go to step 3.
- If the alarm is cleared, go to step 5.
Delete unnecessary services and configurations to reduce memory usage. Then check whether the alarm is cleared.
- If the alarm persists, go to step 4.
- If the alarm is cleared, go to step 5.
Collect alarms, logs, and configurations, and then contact technical support personnel.
End.

Related Information

None