destination-address (PBR rule view)

Function

The destination-address command sets the destination address of packets as a matching condition of a PBR rule.

The undo destination-address command deletes the configuration.

Format

destination-address { address-set address-set-name &<1-6> | ipv4-address { ipv4-mask-length | mask mask-address | wildcard } | ipv6-address ipv6-prefix-length | range { ipv4-start-address ipv4-end-address | ipv6-start-address ipv6-end-address } | isp isp-name &<1-6> }

undo destination-address { address-set address-set-name &<1-6> | ipv4-address { ipv4-mask-length | mask mask-address | wildcard } | ipv6-address ipv6-prefix-length | range { ipv4-start-address ipv4-end-address | ipv6-start-address ipv6-end-address } | isp isp-name &<1-6> | all }

Parameters

Parameter	Description	Value
address-set address-set-name	Specifies an IP address set for destination IP address-based matching. address-set-name specifies the name of an IP address set.	The value must be the name of an existing address set.
ipv4-address	Specifies an IPv4 address for destination IP address-based matching.	The value is in decimal dotted notation.
ipv4-mask-length	Specifies the mask length of an IPv4 address.	The value is an integer ranging from 1 to 32.
mask mask-address	Specifies the mask length of an IPv4 address.	The value is in dotted decimal notation whose binary form cannot be inconsecutive. For example, 255.0.255.0 is not a legitimate wildcard because its binary form is 11111111.00000000.11111111.00000000. In the binary form, digits 1 are to be matched, whereas digits 0 are not. For example, 192.168.1.1/255.0.255.0 indicates that only IP addresses of the 192..1. form are to be matched.
wildcard	Specifies the wildcard of an IPv4 address.	The value is in dotted decimal notation whose binary form cannot be inconsecutive. For example, 0.255.0.255 is not a legitimate wildcard because its binary form is 00000000.11111111.00000000.11111111. In the binary form, digits 0 are to be matched, whereas digits 1 are not. For example, 192.168.1.1/0.255.0.255 indicates that only IP addresses of the 192..1. form are to be matched.
ipv6-address ipv6-prefix-length	Specifies an IPv6 address for destination IP address-based matching. ipv6-address specifies an IPv6 address. ipv6-prefix-length specifies the IPv6 prefix length.	-
range ipv4-start-address ipv4-end-address	Specifies an IPv4 address range for destination IP address-based matching. ipv4-start-address specifies the start IPv4 address. ipv4-end-address specifies the end IPv4 address.	-
range ipv6-start-address ipv6-end-address	Specifies an IPv6 address range for destination IP address-based matching. ipv6-start-address specifies the start IPv6 address. ipv6-end-address specifies the end IPv6 address.	-
isp-name	Specifies the name of an ISP address group.	-
any	Indicates any address.	-
all	Deletes all configurations that use destination IP addresses as a matching condition.	-

Views

PBR rule view

Default Level

2: Configuration level

Usage Guidelines

None

Example

# Set destination IP address 10.1.1.0/24 as a matching condition of a PBR rule.

<sysname> system-view
[sysname] policy-based-route
[sysname-policy-pbr] rule name abc
[sysname-policy-pbr-rule-abc] destination-address 10.1.1.0 24