The startup system-software command configures the file name of the system software used in the next startup.
By default, the file name of the system software used in the next startup of the main control board is configured.
| Parameter | Description | Value |
|---|---|---|
| system-file | Specifies the file name of the system software. | The name is a string of 5 to 48 characters in the format of [ drive-name ] [ file-name ]. If drive-name is not specified, the name indicates the default device name. |
| slave-board | Specifies the file name of the system software used when the secondary main control board starts up. | - |
You can specify the system-file and use the system software for the next startup that is saved on the device.
The file name extension is .cc for the system software of the AntiDDoS8000 series. The system software must be saved under the root directory of the storage device. The storage device is a CF card.
PrecautionsTo simplify the upgrade process, the Fenix software package is integrated into the AntiDDoS8000 software package. In this way, when the AntiDDoS8000 software package is upgraded, the Fenix software package is also upgraded. It will take a long time. Please wait.
After you run this command, the AntiDDoS verifies the system software integrity. If the verification fails, this file cannot be set to the system software for the next startup.
By default, the AntiDDoS8000 verifies only the system software hash list. To verify the system software package, run the set system-software check-range all command first.
System software earlier than V500R001C50 does not contain any digital signature. if the current system software version is V500R001C50, or a later version and an earlier version of system software is loaded, run the set system-software check-mode all command to set the integrity check method to all. Otherwise, the system software will not be set as the startup system software.
# Configure the system software used in the next startup. The AntiDDoS8000 series is used as an example.
<AntiDDoS> startup system-software soft.cc
Info: Before setting a startup software package, you are advised to check its integrity. For details, please check user manual!
# Configure the system software used in the next startup. The AntiDDoS1600 series is used as an example.
<AntiDDoS> startup system-software soft.bin