anti-ddos interface-limit enable

Function

The anti-ddos interface-limit enable command enables the LPU rate limit function.

The undo anti-ddos interface-limit enable command disables the LPU rate limit function.

Format

anti-ddos interface-limit enable

undo anti-ddos interface-limit enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Only the AntiDDoS8000 supports this command.

By default, the LPU rate limit function is disabled.

NOTE:

  • LPU rate limit does not support IPv6 packets.

  • The LPU rate limit does not apply to Layer 2 scenarios.

  • LPU rate limit applies only to two types of LPUs: LPUF-240 and LPUF-120.

Example

# Enable the LPU rate limit function.

<sysname> system-view
[sysname] anti-ddos interface-limit enable
Copyright © Huawei Technologies Co., Ltd.