Querying Comprehensive Reports

Procedure

• Query Device-based system reports.
  1. Choose Report > Comprehensive Report > Comprehensive Report.
  2. Click the System Report tab.
  3. Set system report parameters. For details, see Table 1.

     Table 1 System report parameters

     Parameter	Description	Value
     Device	Select a device from the drop-down list. Total Cleaning and Total Detecting are described as follows: Total (Cleaning): Indicates that traffic on all cleaning devices is queried. Total (Detecting): If two or more detecting devices in a defense group work in Load Redundancy mode, the maximum traffic volume in the defense group is queried and the sum of traffic volumes among defense groups is queried. If two or more detecting devices in each defense group work in Load Balancing mode, the sum of traffic volumes within each defense group and among defense groups is queried.	-
     Comparison	Determines whether to display the cycle comparison figure. The Attack Comparison figure is added to the Display the cycle comparison figure report. The figure shows the attack count comparison between two consecutive cycles.	Not display the cycle comparison figure: queries the data within the given time segment. Display the cycle comparison figure: queries the data within the cycle type to which the selected time point belongs.
     Cycle type	Queries the data between two consecutive cycles. When you set Cycle Comparison to Display the cycle comparison figure, configure this item.	For example, if you set Cycle Type to Week and 2012-08-07, the data within the week to which August 7, 2012 belongs. The Attack Comparison chart displays the attack count comparison between the week to which August 7, 2012 belongs and the last week.
     Time	Click to select the start time and end time of statistics. Or you can change the time values in corresponding text boxes. The end time should be later than the start time and the interval cannot be longer than one year. When you set Cycle Comparison to Not display the cycle comparison figure, configure this item.	-
     Report Format	Indicates the report format. The format can be PDF, HTML, or EXCEL.	-
     Report Type	Indicates the report contents.	-

  4. Click OK. On the file download page that is displayed, open or save the system report.

     If you need to reset the parameter, click Reset.

• Query Zone reports.
  1. Choose Report > Comprehensive Report > Comprehensive Report.
  2. Click the Zone Report tab.
  3. Set Zone report parameters. For details, see Table 2.

     Table 2 Zone report parameters

     Parameter	Description	Value
     Zone	Click , select a Zone on the Zone page that is displayed, and then click OK.	-
     Device	Select a device from the drop-down list. Total Cleaning and Total Detecting are described as follows: Total (Cleaning): Indicates that traffic on all cleaning devices is queried. Total (Detecting): If two or more detecting devices in a defense group work in Load Redundancy mode, the maximum traffic volume in the defense group is queried and the sum of traffic volumes among defense groups is queried. If two or more detecting devices in each defense group work in Load Balancing mode, the sum of traffic volumes within each defense group and among defense groups is queried.	-
     Comparison	Determines whether to display the cycle comparison figure. The Attack Comparison figure is added to the Display the cycle comparison figure report. The figure shows the attack count comparison between two consecutive cycles.	Not display the cycle comparison figure: queries the data within the given time segment. Display the cycle comparison figure: queries the data within the cycle type to which the selected time point belongs.
     Cycle type	Queries the data between two consecutive cycles. When you set Cycle Comparison to Display the cycle comparison figure, configure this item.	For example, if you set Cycle Type to Week and 2012-08-07, the data within the week to which August 7, 2012 belongs. The Attack Comparison chart displays the attack count comparison between the week to which August 7, 2012 belongs and the last week.
     Time	Click to select the start time and end time of statistics. Or you can change the time values in corresponding text boxes. The end time should be later than the start time and the interval cannot be longer than one year. When you set Cycle Comparison to Not display the cycle comparison figure, configure this item.	-
     Report Format	Indicates the report format. The format can be PDF, HTML, or EXCEL.	-
     Report Type	Indicates the report contents.	-

  4. Click OK. On the file download page that is displayed, open or save the Zone report.

     If you need to reset the parameter, click Reset.

     To send Zone reports through email, click Send Email. To receive the generated reports through email, configure the mail server in the ATIC management center. For details, see Mail Server.