You must perform this operation when the confirmation mode of service learning is Manual confirmation.
Prerequisites
The service learning task has been enabled. For details, Configuring a Service Learning Task.
Context
Service learning results contain service names, protocol, ports, IP addresses, traffic, devices, and state. During the confirmation of service learning results, the system checks whether services of the same type and port exist on the associated device in the service policy of the Zone, and performs corresponding processing.
If such services exist, add learnt IP addresses to the services.
If no such service exists, add services to the policy of the Zone, including service names, types, ports, IP addresses, and associated devices.
Procedure
- Choose .
- Click the Zone's state in the Service Learning column.
- In the Service Learning Result List group box, select the check box of a service and click Apply.
Result
- Choose .
Click
of the Zone.On the Defense Policy tab page, you can view applied service learning results.
Click
of each service to modify the basic information and configure defense policies of
the service. For parameters of the defense policies, see Configuring the Zone-based Defense Policy.
Follow-up Procedure
After service learning results are applied to the Zone, configurations take effect only after deployed on devices. For details, see Deploying the Defense Policy.