Board Traffic

Board Traffic displays the traffic of the SPUs on an device.

**Table 1** Query parameters of Board Traffic
Parameter	Description
Direction	Select Inbound or Outbound the drop-down list.
Device	Select an device from the drop-down list.
Protocol	Select a protocol type from the drop-down list.
Time	Click to select the start time and end time of statistics. Or you can change the time values in corresponding text boxes. The end time should be later than the start time and the interval cannot be longer than one year. If the query interval is longer than or equal to seven days and shorter than one year, statistics are collected daily. If the query interval is longer than or equal to one day and shorter than seven days, statistics are collected hourly. If the query interval is shorter than one day, statistics are collected every five minutes.
Unit	Select a traffic measurement unit. The unit can be pps or kbps. The default unit is pps.

If the device is set to bj-Cleaning and the protocol to UDP, board traffic within a period of time is displayed in Figure 1.

Figure 1 Board traffic

NOTE:

For the AntiDDoS1600, slot 11 has a virtual board.

Choose Report > Report > Traffic Analysis.
Click the Board Traffic tab.
Set query parameters. For details, see Table 1.
Click Search.
The board traffic result that meets query conditions is displayed.
Optional: Open or save the query results as files, or send queried reports to the specified email address.
- Click to open or save the query results as PDF files. A maximum of 10,000 entries can be displayed.
- Click to open or save the query results as EXCEL files. A maximum of 10,000 entries can be displayed.
- Click to enter a recipient mail address and select an attachment format. Then click OK.