You can configure the mail server to send the information to the specified email address.
Prerequisites
When a mail server is configured, ensure that the SMTP/POP3 function is enabled for sender accounts registered on the server.
Context
The proxy server supports only the SOCKS 5 proxy when you configure the basic information for the mail server.
The SOCKS protocol enables the client/server application programs in the TCP and UDP domains to conveniently and securely use the network firewall. The proxy server that uses the SOCKS protocol is called the SOCKS server and is a universal proxy server. The SOCKS proxy is usually used in the email and is bound to port 1080 on the proxy server. If the SOCKS proxy service requires identity authentication, you need to apply to the network administrator for a user name and password.
Procedure
- Choose .
- Configure the basic information for the mail server.
- In the Email Server area, click
. - Configure the basic information for the mail server, as described
in Table 1.
Table 1 Mail server parameters Parameter
Description
Recommended Value
SMTP server
IP address or domain name of the SMTP server that is responsible for sending the notification mail.
-
Server port
Port number of the SMTP server.
Default value:465.
- Default value(SSL):465.
- Default value(Plain):25.
Connection mode
- SSL
- Plain
NOTE:You are advised to select the secure encrypted SSL connections. Otherwise, security risks are caused.Sender email
Email addresses that sends the notification mail messages.
The email address can contain only 1 to 32 characters.
Test email
Email address used to verify that the communication between the ATIC Management center server and mail server is normal.
The email address can contain only 1 to 32 characters.
Username
User name that is used to access the SMTP server.
This parameter is required only when SMTP server identity authentication is selected.
You can enter the user name registered on the SMTP mail server or obtained from the provider of the mail server.
Password
Password that is used to access the SMTP server.
This parameter is required only when SMTP server identity authentication is selected.
The passwords must meet the minimum complexity requirement. That is, the passwords must contain at least three of the following, including upper-case letters (A to Z), lower-case letters (a to z), digits (0 to 9), and special characters (such as !, #, $, and %). You must change the passwords periodically.
Proxy server IP address
IP address of the proxy server.
This parameter is required only when Proxy server is selected.
-
Proxy server Port
Port number of the proxy server.
This parameter is required only when Proxy server is selected.
Default value: 1080.
Email Signature
-
-
SMTP= Simple Mail Transfer Protocol
NOTE: After the parameters are specified, you can click Test to check whether the testing email box can receive the testing message.- If yes, the communication between the ATIC Management center server and the mail server is normal .
- If no, an error message will be displayed. Handle the exception according to the message.
- Click OK.
- In the Email Server area, click