SPCA-APPSEC-FW

SPCA-APPSEC-FW is a single-CPU subcard of the anti-DDoS service and provides the SSL decryption function. The subcard occupies one sub-slot of the service board. The subcard can be installed on the backplane of the service board or intermixed with the anti-DDoS service subcard. Hot swap is not supported.

Panel

Figure 1 shows the SPCA-APPSEC-FW.

Figure 1 SPCA-APPSEC-FW

Number	Name	Description
1	OFL button	To remove a board, press and hold the OFL button for six seconds until the OFL indicator turns red for one second and then turns off.
2	OFL indicator	If the indicator is green and blinks once every second (1 Hz), the board is running normally. If the indicator is green and blinks four times every second (4 Hz), the board is in the alarm state or starting but not registered. If the indicator turns red for one second and then turns off, you can safely remove the board.

Technical Specifications

Table 1 lists the technical specifications of the SPCA-APPSEC-FW.

**Table 1** Technical specifications of the SPCA-APPSEC-FW
Item	Specifications
Board silkscreen name	SPCF01 SPCA-APPSEC-FW
Part number
Dimensions (H x W x D)	36 mm x 175 mm x 280 mm (1.42 in. x 6.89 in. x 11.02 in.)
Typical power consumption	90 W
Maximum power consumption	100 W
Typical heat consumption	307.1 BTU/hour
Maximum heat consumption	341.2 BTU/hour
Board weight	1.30 kg
CPU number	1
CPU	1.6 GHz
Memory	DDR4 32 GB