SPCB-APPSEC-FW

SPCB-APPSEC-FW is a dual-CPU subcard of the anti-DDoS service and provides the SSL decryption function. The subcard occupies one sub-slot of the service board. The subcard can be installed on the backplane of the service board or intermixed with the anti-DDoS service subcard. Hot swap is not supported.

Panel

Figure 1 shows the SPCB-APPSEC-FW.

Figure 1 SPCB-APPSEC-FW

Number	Name	Description
1	OFL button	To remove a board, press and hold the OFL button for six seconds until the OFL indicator turns red for one second and then turns off.
2	OFL indicator	If the indicator is green and blinks once every second (1 Hz), the board is running normally. If the indicator is green and blinks four times every second (4 Hz), the board is in the alarm state or starting but not registered. If the indicator turns red for one second and then turns off, you can safely remove the board.

Technical Specifications

Table 1 lists the technical specifications of the SPCB-APPSEC-FW.

**Table 1** Technical specifications of the SPCB-APPSEC-FW
Item	Specifications
Board silkscreen name	SPCH01 SPCB-APPSEC-FW
Part number
Dimensions (H x W x D)	36 mm x 175 mm x 280 mm (1.42 in. x 6.89 in. x 11.02 in.)
Typical power consumption	180 W
Maximum power consumption	200 W
Typical heat consumption	614.2 BTU/hour
Maximum heat consumption	682.4 BTU/hour
Board weight	1.42 kg
CPU number	2
CPU	1.6 GHz
Memory	DDR4 32 GB/CPU