check startup

命令功能

check startup命令用来检查各种资源文件(PAF文件、license文件、补丁包、启动软件、配置文件)是否正确。

命令格式

check startup [ crc ] [ next ]

参数说明

参数 参数说明 取值
crc 对资源文件进行CRC校验。 CRC用于完整性校验,存在安全风险,建议不选择该参数。
next 检查下一次启动的各种资源文件。 -

视图

用户视图

缺省级别

1:监控级

使用指南

一般配置完下次启动的资源文件后,用此命令检查一下配置的资源文件是否完整、格式和版本是否正确。

使用实例

# 检查资源文件是否正确。

<AntiDDoS> check startup
MainBoard:
Check startup software.......ok
Check configuration file.....ok
Check paf....................ok
Check License................ok
Check Patch..................ok
Paf is fitted with startup software
License is fitted with startup software
Patch is fitted with startup software

SlaveBoard:
Check startup software.....ok
Check configuration file...ok
Check paf..................ok
Check License..............ok
Check patch................ok
Paf is fitted with startup software
License is fitted with startup software
Patch is fitted with startup software
Startup software in slave board is fitted with mainboard

# 对资源文件进行CRC校验。

<AntiDDoS> check startup crc
Warning: This operation will take serval minutes! Continue?[Y/N]:y
Check startup software CRC
.......................................................................
Check startup software CRC...failed
Check startup software CRC in slaveboard
.......................................................................
Check startup software CRC...failed
相关主题
startup paf
startup license
startup patch
startup system-software

版权所有 © 华为技术有限公司