Protocol Traffic Distribution

Function

The protocol traffic distribution chart shows the proportion of the TCP, UDP, ICMP, and other traffic. You can view the distribution of the inbound and outbound traffic of the cleaning device, and the distribution of the detected traffic of the detecting device.

Parameter

**Table 1** Query parameters of protocol traffic distribution
Parameter	Description
Direction	Select Inbound or Outbound the drop-down list.
Device	Select a device from the drop-down list.
Zone	Click , select a Zone on the Zone page that is displayed, and then click OK.
IP Address	Enter the destination IP address. Both IPv4 and IPv6 addresses are applicable. Traffic destined for the IP address is queried.
Time	Click to select the start time and end time of statistics. Or you can change the time values in corresponding text boxes. The end time should be later than the start time and the interval cannot be longer than one year.
Unit	Select a traffic measurement unit. The unit can be pps or kbps. The default unit is pps.

Example

If the device is set to DDoS-Cleaning and the Zone is set to All, traffic distribution within a period of time is displayed in Figure 1.

Figure 1 Protocol traffic distribution

If the device is set to DDoS-Detecting and the Zone is set to All, traffic distribution within a period of time is displayed in Figure 2.

Figure 2 Protocol traffic distribution

Procedure

Choose Report > Report > Traffic Analysis.
Click the Protocol Traffic Distribution tab.
Set query parameters.
Click Search.
Traffic distribution that meets query conditions is displayed.
Optional: Open or save the query results as files, or send queried reports to the specified email address.
- Click to open or save the query results as PDF files. A maximum of 10,000 entries can be displayed.
- Click to open or save the query results as EXCEL files. A maximum of 10,000 entries can be displayed.
- Click to enter a recipient mail address and select an attachment format. Then click OK.