View Configuration

Context

You can view interface related functions on this page.

NOTE:

If the switch does not support the MEth port, click Configuration > Basic Services > Interface Settings to access the configuration page.

Procedure

Choose Configuration > Basic Services > Interface Settings > Service Interface Setting. Click View Configuration.
Click an interface icon to select an interface. You can select only one interface at one time.

Check the interface functions in step 3.

Table 1 describes the parameters on the View Interface Attribute.

**Table 1** Interface status list
Item	Description
Interface	Indicates the type and number of the selected interface.
Interface Status	Up: The interface is enabled. Down: The interface is disabled. Shutdown: The shutdown command has been run on the interface.
Auto-Negotiation	Indicates the auto-negotiation status of the interface. Enable: Auto-negotiation is enabled. Disable: Auto-negotiation is disabled.
Duplex Mode	Indicates the duplex mode of the interface. Full-duplex Half-duplex
Interface Rate	Indicates the interface rate.
Jumbo	Indicates the maximum frame length allowed by the interface.
Combo	Indicates the working mode of a combo interface. auto: The combo interface automatically selects the working mode. copper: The combo interface works as an electrical interface and uses a network cable to transmit and receive data. fiber: The combo interface works as an optical interface and uses an optical fiber to transmit and receive data. --: The combo interface is not supported.
Flow Control	Indicates the flow control status. Enable: Flow control is enabled on the interface. Disable: Flow control is disabled on the interface.
EEE	Indicates energy efficient Ethernet (EEE) that dynamically adjusts the electrical interface power according to network traffic volume. Enable: The EEE function is enabled on the interface. Disable: The EEE function is disabled on the interface.
Power Saving Mode	Indicates whether the power saving mode is enabled. Enable: The power saving mode is enabled on the interface. Disable: The power saving mode is disabled on the interface.

If you want to delete all configurations on the interface to restore the default settings, click Clear Configuration. After configurations are deleted, the interface is disabled.