ARP Table

You can query ARP entries in the ARP table.

Context

Procedure

• Query the ARP table.
  1. Choose Service Management > ARP > ARP Table in the navigation tree to open the ARP Table page.

     Table 1 describes the parameters on the ARP Table page.

     Table 1 ARP Table

     Parameter	Description
     ARP Type	Indicates the type of ARP entries. You can search for static entries, dynamic entries, or all entries.
     Destination IP	Indicates the destination IP address in an ARP entry, for example, 10.10.10.1.
     Mask	Indicates the mask of the destination IP address, for example, 24(255.255.255.0). You can specify the destination IP address and mask to search for ARP entries of a network segment.
     Destination MAC	Indicates the destination MAC address in an ARP entry, for example, 0022-0022-0022.
     VLAN ID	Indicates the VLAN ID in an ARP entry.
     Interface Name	Indicates the interface in an ARP entry. First select an interface type from the drop-down list box. The options are All, Ethernet, GigabitEthernet, and XGigabitEthernet. Then enter the interface number in the text box, for example, 0/0/1. To specify an Eth-Trunk, enter the interface name in the text box, for example, Eth-Trunk12.

  2. Set the search criteria.
  3. Click Query. The search results are displayed.
• Delete all dynamic entries.

  You can click Reset Dynamic Entries to delete all dynamic ARP entries.

  1. Choose Service Management > ARP > ARP Table in the navigation tree to open the ARP Table page.
  2. Click Reset Dynamic Entries. The system asks you whether to delete all dynamic entries.
  3. Click OK.
     NOTE:

     You can click Refresh to display new ARP entries after deleting the original dynamic entries.