You can create, query, modify, or delete an isolation mode
or a bidirectional isolation configuration.
Context
- Interfaces in a port isolation group are isolated from each other,
but interfaces in different port isolation groups can communicate.
- The switch supports 64 VLANs from VLAN 1 to VLAN 64.
Procedure
- Configure an isolation mode.
NOTE: - The default mode is L2, namely, ports are isolated at Layer 2
but can communicate at Layer 3.
- After the isolation mode is selected, the bidirectional isolation
and unidirectional isolation configurations are applied to this mode.
- Configuring the isolation mode is not affected by switching the
bidirectional isolation and unidirectional isolation labels.
- The S2700 switches do not support the function.
- Choose in the navigation
tree to open the Port isolation page.
- Choose the isolation mode. The isolation can be L2 or
ALL. L2 is Layer 2 isolation and Layer 3 communication. ALL is the
isolation at both Layer 2 and Layer 3.
- Click Apply.
- Query an isolation group.
- Choose in the navigation tree to open the Bidirectional
isolation page.
- Enter a number in the text box of isolation group number.
- Click Query to display all matching
records.
- Create an isolation group.
- Choose in the navigation tree to open the Bidirectional
isolation page.
- Click New to open the Create an isolation group page.
Table 1 describes the parameters
on the page.
Table 1 Create an isolation group
Parameter
|
Description
|
Isolation group
number
|
Indicates the value that the system generates automatically.
The value ranges from 1 to 64. When creating an isolation group, the
system assigns the minimum in existing numbers to the new isolation
group.
|
Port list
|
Select the interface that you want to add to the isolation
group on the port list on the left. Click to display the new
interface on the right list.
|
- Select an interface.
- Click OK.
- Modify an isolation group.
- Choose in the navigation tree to open the Bidirectional
isolation page.
- Click the corresponding
icon to open the Modify isolation group page.
Table 1 describes the parameters
on the page.
- Select an interface.
- Click OK.
- Delete an isolation group.
- Choose in the navigation tree to open the Bidirectional
isolation page.
- Select the isolation group that you want to delete.
You can delete an isolation group or multiple isolation groups.
- Click Delete. The system asks
you whether to delete the record.
- Click OK on the dialog box.
Copyright © Huawei Technologies Co., Ltd.