Tracert

You can use the tracert command to test the gateways that packets pass through from the source host to the destination host. The tracert command is used to check network connectivity and locate network faults.

Context

The Tracert command, also called Trace Route helps you check the IP addresses and the number of gateways between the source and the destination. Tracert is used to check network connectivity and locate network faults.

Procedure

  1. Choose Tools > Tracert in the navigation tree to open the Trace Route page.
  2. Enter the IP address in the tracert text box and click Start. The Layer 3 devices where packets pass through between the source host and the destination host are displayed

    NOTE:
    • The output of the tracert command includes IP addresses of all the gateways through which the packet reaches the destination. If one gateway sends back a packet indicating TTL timeout, * is displayed.
    • The tracert test may takes a long time.

Parent topic: Tools
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.