Configure Static User Binding

You can configure static user binding.

Procedure

• Create a binding.
  1. Choose Security > Static user binding in the navigation tree to open the Static user binding page.
  2. Click New to open the Create a binding page.

     Table 1 describes the parameters on the page.

     Table 1 Create a binding

     Parameter		Description
     Interface Name		Indicates the type and name of the interface that you want to bind. Interface types include Ethernet, GigabitEthernet, XGigabitEthernet, and Eth-Trunk. The interface type and name are mandatory.
     Binding mode		The binding modes in the drop-down list box include: MAC+port IP+port IP+MAC+port Select one binding mode from the modes above. This parameter is mandatory.
     VLAN ID		If the check box of VLAN is not selected and the VLAN ID text box is not available, the VLAN is not bound. If the check box of VLAN is selected, VLAN is bound. This parameter is mandatory.
     Binding Information		If you select MAC+port, the binding information is displayed in the text box of the MAC address. If you select IP+port, the binding information is displayed in the text box of the IPv4/IPv6 address. You can choose the IPv4 or IPv6 address. If you select IP+MAC+port, the binding information is displayed in the text boxes of the MAC and IPv4/IPv6 address.

  3. Set parameters.
  4. Click OK.
• Delete a binding.
  1. Choose Security > Static user binding in the navigation tree to open the Static user binding page.
  2. Select a record that you want to delete and click Delete. The system asks you whether to delete the record.
     NOTE:

     • To select a record, click the check box of the record.
     • To delete records in batches, click the check boxes of the records.
     • When you delete IP+port or IP+port+VLAN binding, all binding information about this IP address is deleted.
     • When you delete MAC+port or MAC+port+VLAN binding, all binding information about this MAC address is deleted.
     • When you delete IP+MAC+port binding, all binding information about this IP+MAC is deleted.
     • When you delete IP+MAC+port+VLAN binding, all binding information about this IP+MAC+VLAN is deleted.

  3. Click OK.