The navigation tree consists of ten nodes: Device Summary, System Management, Interface Management, Service Management, ACL, QoS, IP Routing, Security,Tools and save.
Each node has subnodes, as described in Table 1.
NOTE: The menus in the navigation tree vary depending on switch models.
Node |
Subnode |
Description |
|---|---|---|
Device Summary |
Panel |
Displays information about the device panel. |
System Description |
Displays the product type, location, software version, and hardware version of the switch. |
|
Board Health |
Displays the current CPU usage, memory usage, fan status and temperature of the switch. |
|
Trends |
Displays the CPU usage, memory usage, temperature, and port usage of the switch according to your selection. |
|
Config Wizard |
EasyOperation |
Configuration wizard which helps you quickly configure global Easy-Operation parameters to implement basic functions for Easy-Operation. |
System Management |
Initialize |
Restores the factory settings of the switch. |
Reboot |
Chooses the system software, configuration file, and patch file for next startup of the switch. |
|
Software Upgrade |
Upgrades the software of the switch. |
|
Patch |
Loads the patch file to the switch . |
|
File System Management |
Manages files, including uploading files to the switch, downloading files from the switch, and restoring or permanently deleting files in the recycle bin. |
|
System Configuration |
Sets the system information such as system time and maintenance information. |
|
PoE |
Configures and queries global PoE information and PoE on interfaces. |
|
DNS |
Configures and queries dynamic DNS entries, DNS server, domain name suffix, and dynamic domain name resolution function. |
|
Stacking |
Configures and queries the stacking function. |
|
Log Management |
Allows you to view operation logs. |
|
EasyOperation |
Configures roles, groups, and clients to implement Easy-Operation. |
|
Interface Management |
Ethernet |
Configures and queries basic attributes of interfaces and traffic statistics on the interfaces. |
Eth-Trunk |
Configures and queries Eth-Trunk interfaces and LACP priority. |
|
VLANIF |
Configures and queries VLANIF interfaces. |
|
LoopBack |
Configures and queries the LoopBack interfaces. |
|
Service Management |
VLAN |
Configures and queries VLANs, interfaces, and VLANIF interfaces. |
MAC |
Configures and queries MAC address table, MAC address aging time, MAC address learning function, static MAC address entries, blackhole MAC address entries, and sticky MAC function. |
|
STP |
Configures and queries global STP information, STP on interfaces, and domains. |
|
Voice VLAN |
Configures and queries voice VLAN, OUI, and aging time. |
|
DHCP |
Configures and queries DHCP global address pool, address pool on VLANIF interface, and DHCP relay. |
|
ARP |
Configures and queries ARP entries, static ARP entries, and ARP parameters. |
|
VRRP |
Configures and queries VRRP information. |
|
IGMP Snooping |
Configures and queries global IGMP information and IGMP snooping of VLANs. |
|
ACL |
Effective Period |
Configures and queries the ACL effective period. |
ACL |
Configures and queries ACL information. |
|
QoS |
Traffic Management |
Configures and queries the traffic classifier-based QoS function, including traffic classification, traffic behavior, traffic policy, and application of traffic policy. |
Limit Rate |
Configures and queries the interface rate limiting function. |
|
Traffic Shaping |
Configures and queries the traffic shaping function. |
|
Congestion Management |
Configures and queries congestion management on interfaces. |
|
Priority Mapping |
Configures and queries the priority mapping and trusted interface functions. |
|
IP Routing |
IPv4 Route |
Configures and queries IPv4 routes, including IPv4 static routes and global IPv4 routing information. |
Security |
Port isolation |
Configures and queries isolation mode and isolation directions. |
Static user binding |
Configures and queries static user binding information. |
|
AAA |
Configures and queries the security functions, including authentication, authorization, and accounting (AAA), service templates, RADIUS templates, RADIUS authentication and accounting servers, RADIUS authorization servers, domain management, and user management. |
|
802.1X |
Configures and queries global 802.1X parameters and 802.1X parameters on interfaces. |
|
MAC Authen |
Configures and queries global MAC address authentication and MAC address authentication on interfaces. |
|
Tools |
Ping |
The ping function. |
Tracert |
The tracert function. |
|
VCT |
The VCT function. |