You can disable an idle interface that is not connected
to a cable or an optical fiber on the GUI to prevent the idle interface
from interfering other interfaces in working state.
Procedure
Click Configuration in the function
area and choose Interface Setting > Enable/Disable Interface from
the navigation tree in the left. The Enable/Disable Interface is displayed.
Select the interface that you want to configure. Perform
either of the following operations as required.
Click an interface icon to select an interface.
Drag the mouse to select multiple consecutive interfaces in a
batch.
Select an interface card name to select all the interfaces on
the interface card.
Set parameters on the Configure interface.
Table 1 describes the parameters
on the Configure interface.
Table 1 Parameters on the Configure interface
Item
Description
Management status
Select the interface status from the drop-down list box.