topology enable

Function

The topology enable command enables the Commander to collect network topology information.

The undo topology enable command disables the Commander from collecting network topology information.

By default, the Commander cannot collect network topology information.

Format

topology enable

undo topology enable

Parameters

None

Views

Easy-Operation view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to enable the Commander to collect network topology information every 5 minutes. Based on the collected information, unconfigured device deployment and automatic faulty device replacement can be implemented.

Prerequisites

NDP and NTDP have been enabled.

Example

# Enable network topology information collection on the Commander.

<HUAWEI> system-view
[HUAWEI] easy-operation
[HUAWEI-easyoperation] topology enable