This section describes submenus and their functions provided by the web system.
The web system consists of five areas: Monitoring, Configuration, Diagnosis, Maintenance, and Network, and provides the following functions: device status overview, interface management, VLAN, DHCP, system management, service management, diagnosis tool, and network deployment.
Table 1 lists submenus in the four areas and describes their functions.
NOTE: The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.
Menu |
Submenu |
Description |
|
|---|---|---|---|
Monitoring |
Summary (Standalone) |
Display the device panel, system description, switch status, top 5 bandwidth usage, logs, and alarms. |
|
Summary (SVF) |
Display SVF brief information and switch status. |
||
User |
Display access user information. |
||
Topology (SVF) |
Display level-1 AS topology. |
||
Wired Service (SVF) |
Display information about AS and user port group. |
||
Wireless Service |
Radio |
Display radio distribution and information. |
|
AP |
Display AP distribution, AP statistics, and wired port statistics. |
||
SSID |
Display SSID and VAP. |
||
Mesh&WDS |
Display mesh links and WDS bridge information. |
||
Potential Risk |
Display the STAs receiving poor signals and related radio information. |
||
WIDS |
Display detection information about wireless devices and attacked devices. |
||
Spectrum Analysis |
Provide spectrum analysis. |
||
Configuration |
Quick Config |
Quickly configure switching and routing modes. |
|
SVF Quick Config (SVF) |
SVF Enabling |
Configure a standalone switch as the parent. |
|
AS Addition |
Add ASs to an SVF and configure Fabric-Port. |
||
AS User-Side Service |
Configure services on AS user port group. |
||
AP Addition |
Add APs to an SVF. |
||
AP User-Side Service |
Configure AP services. |
||
Network-Side Service |
Allow users to access the external network. |
||
Advanced SVF Config (SVF) |
AS Access Mgmt |
Add AS blacklist and whitelist and an AS group to an SVF system. |
|
AS Port Group |
Add an AS port group to an SVF system. |
||
AS Profile Mgmt |
Add AS profiles to an SVF system. |
||
AS Direct Config |
Configure ASs on the parent directly. |
||
Basic Services |
Interface Settings |
Interface configuration includes the following configuration pages: View Configuration, Connect to PC, Connect to IP Phone, Connect to Switch, Connect to Router, Enable/Disable Interface, Port Loopback Test, and Detect Link. |
|
View Transceiver Info |
Display optical module information. |
||
VLAN |
Configure and query VLANs, Modify VLANs, and Delete VLANs. |
||
DHCP |
Configure and query DHCP address pool on VLANIF interface, and DHCP relay. |
||
Static Route |
Configure static routes. |
||
Advanced Services |
Voice VLAN |
Configure voice VLAN. |
|
MAC |
Query MAC/IP address table, Configure static MAC address entries, Configure static secure MAC address, Configure blackhole MAC address entries, and Delete MAC address entries function. |
||
IP Services |
Configure IP services. |
||
IP Route |
Configure IP route. |
||
VRRP |
Configure VRRP. |
||
LBDT |
Configure the loopback detection function. |
||
STP |
Configure the STP function. |
||
LLDP |
Configure the LLDP function. |
||
IGMP Snooping |
Configure IGMP snooping. |
||
MLD Snooping |
Configure MLD snooping. |
||
PoE |
Provide PoE management. |
||
Mirroring |
Configure mirroring. |
||
Stack |
Configure stack. |
||
Security Services |
ACL Config |
Configure ACLs. |
|
ACL Reference |
Reference ACLs. |
||
AAA |
Configure AAA. |
||
AAA Service App |
Apply AAA. |
||
AAA Profile Mgmt |
Provide AAA profile management. |
||
ACL |
Configure interface ACLs and VLAN ACLs to filter packets. |
||
User Access Control |
Configure Authentication Configuration, Portal Server, and Access Configuration to provide security management on the network. |
||
QoS Configuration |
Configure QoS. |
||
IP Security |
Configure IP security. |
||
Storm Control |
Configure storm control. |
||
Port Isolation |
Configure port isolation. |
||
Fast WLAN Config (Standalone) |
AC |
Configure network connections and allow APs to go online. |
|
AP |
Configure WLAN service and allow STAs to go online. |
||
Mesh |
Configure the mesh network. |
||
Wireless Services |
AC Config |
Set CAPWAP parameters and configure radio calibration. |
|
AP Group |
Configure AP groups and static load balancing. |
||
AP Config |
Add and manage APs. |
||
Profile |
Configure the WLAN profiles. |
||
Diagnosis |
Intelligent Diagnosis |
Enable intelligent diagnosis for switches, APs, and STAs on WLAN. |
|
Diagnostic Tools |
Provide switch maintenance and diagnosis tools. |
||
Maintenance |
System Maintenance |
License |
Load license files and display license status. |
Restart (Standalone)/Reboot (SVF) |
Restart the switch. |
||
Upgrade |
Upgrade the system software. |
||
Patch |
Upload, install, and uninstall patches. |
||
Log |
Display the latest 300 logs. |
||
Alarm |
Display the latest 300 alarms. |
||
Administrator |
Manage web users. |
||
System |
Manage the system, including files, system time, system information, and factory settings recovery. |
||
SNMP |
Configure the SNMP agent function. |
||
Electronic Label |
Display elabel information on the switch. |
||
AS Interface (SVF) |
Display AS interface information. |
||
AP Maintenance |
AP Upgrade |
Upgrade APs. |
|
AP Restart |
Restart APs. |
||
Log |
Manage AP logs. |
||
Account |
Manage AP accounts. |
||
Network (Standalone) |
Role Configuration |
Determine the role of a device before configuring EasyDeploy on the device. |
|
Summary |
Displays network topology information and saves the network topology on the device. |
||
Deployment |
Deploy unconfigured devices, replace faulty devices, and perform batch upgrade based on the network topology. |
||
Batch Configuration |
Perform batch configuration on the devices by delivering command line scripts to the specified devices. |
||
Power Consumption |
Displays power consumption of all the devices on the entire network and of each device. |
||