View Configuration

Procedure

1. Choose Configuration > Basic Services > Interface Settings > Service Interface Setting. Click View Configuration.

2. Click an interface icon to select an interface. You can select only one interface at one time.
3. Check the interface functions in step 3.

   Table 1 describes the parameters on the View Interface Attribute.

   Table 1 Interface status list

   Item	Description
   Interface	Indicates the type and number of the selected interface.
   Interface Status	Up: The interface is enabled. Down: The interface is disabled. Shutdown: The shutdown command has been run on the interface.
   Auto-Negotiation	Indicates the auto-negotiation status of the interface. Enable: Auto-negotiation is enabled. Disable: Auto-negotiation is disabled.
   Duplex Mode	Indicates the duplex mode of the interface. Full-duplex Half-duplex
   Interface Rate	Indicates the interface rate.
   Jumbo	Indicates the number of Ethernet frames with length ranging from 1518 bytes to the maximum jumbo frame length and correct FCS values received by the interface, or number of VLAN frames with length ranging from 1522 bytes to the maximum jumbo frame length and correct FCS values received by the interface. Indicates the number of frames with length exceeding 1518 bytes and correct FCS values sent by the interface, or number of sent VLAN frames with length exceeding 1522 bytes and correct FCS values sent by the interface.
   Combo	Indicates the working mode of a combo interface. auto: The combo interface automatically selects the working mode. copper: The combo interface works as an electrical interface and uses a network cable to transmit and receive data. fiber: The combo interface works as an optical interface and uses an optical fiber to transmit and receive data. --: The combo interface is not supported.
   Flow Control	Indicates the flow control status. Enable: Flow control is enabled on the interface. Disable: Flow control is disabled on the interface.
   EEE	Indicates energy efficient Ethernet (EEE) that dynamically adjusts the electrical interface power according to network traffic volume. Enable: The EEE function is enabled on the interface. Disable: The EEE function is disabled on the interface.
   Power Saving Mode	Indicates whether the power saving mode is enabled. Enable: The power saving mode is enabled on the interface. Disable: The power saving mode is disabled on the interface.

4. If you want to delete all configurations on the interface to restore the default settings, click Clear Configuration. After configurations are deleted, the interface is disabled.