- Create a serial profile.
- Choose . The Serial Profile List page is displayed.
- Click Create. The Create Serial Profile page is displayed.
- Enter the name of the new serial profile in Profile name.
To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If none is selected, parameters are not copied from another profile.
- Click OK. The parameter setting page of the new serial profile is displayed.
- Set parameters for creating a serial profile. For description of the parameters, see Table 1.
Table 1 Parameters for creating a serial profile Parameter
Description
Serial Profile
Name of a serial profile, which cannot be modified.
Baud rate (bps)
Baud rate of the serial port in an IoT slot.
Parity check type
Parity check type of the serial port in an IoT slot.
Stop bit
Stop bit of the serial port in an IoT slot.
Frame format
Frame format of the serial port in an IoT slot.
- Fixed frame length: enables packet fragmentation based on fixed frame length.
- Start and stop flags of fixed-length frames: enables packet fragmentation based on start and stop flags of fixed-length frames.
Frame length
Frame length of the serial port in an IoT slot.
This parameter can be set only when Frame format is set to Fixed frame length.
Frame start flag
Frame start flag of the serial port in an IoT slot.
This parameter can be set only when Frame format is set to Start and stop flags of fixed-length frames.
Frame end flag
Frame end flag of the serial port in an IoT slot.
This parameter can be set only when Frame format is set to Start and stop flags of fixed-length frames.
- Click Apply.
- Modify a serial profile.
- Choose . The Serial Profile List page is displayed.
- Click the name of the serial profile that you want to modify. The serial profile configuration page is displayed.
- Modify parameters for the Serial profile. For description of the parameters, see Table 1.
- Click Apply.
- Delete a serial profile.
- Choose . The Serial Profile List page is displayed.
- Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
- Clear serial profiles.
- Choose . The Serial Profile List page is displayed.
- Click Clear. In the Confirm dialog box that is displayed, click OK.
- Display the profile reference relationship.
- Choose . The Serial Profile List page is displayed.
- Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.
NOTE: Click Hide Reference Relationship. The system hides the displayed results.