STP Summary

Procedure

• Enable STP globally.
  1. Configuration > Advanced Services > STP > STP Summary to access the STP Summary page.
  2. Set Global STP status to ON to enable STP globally.
     NOTE:

     The STP Global Setting and Interface Status parameters are available only when the STP is enabled globally.

• Configure Global STP.
  1. Choose Configuration > Advanced Services > STP > STP Summary to access the STP Summary page.

     Table 1 describes the parameters on the STP Summary page.

     Table 1 Description of parameters on the STP Summary page

     Parameter	Description
     STP working mode	Working mode of STP: MSTP: The switch sends MSTP BPDUs. RSTP: The switch sends RSTP BPDUs. STP: The switch sends STP BPDUs. VBST: The switch sends VBST BPDUs. NOTE: In an SVF, the value is RSTP by default and cannot be changed.
     BPDU protection	Whether BPDU protection is enabled: ON: BPDU protection is enabled. OFF: BPDU protection is disabled.

  2. Set parameters and click Apply.
• Configure the port status.
  1. Choose Configuration > Advanced Services > STP > STP Summary to access the STP Summary page.
  2. Enter the instance ID in the Instance text box.
  3. Select a port to be configured.

     Perform either of the following operations.

     • Click the port icon to select one or more ports.
     • Drag the mouse to select consecutive ports in a batch.
     • Select the device panel to select all ports.

  4. Click Enable STP, Disable STP, Enable Edge Port, or Disable Edge Port to configure selected ports.