Congestion Management

Context

When congestion occurs on a network, the switch configured with congestion management determines the sequence at which packets are forwarded based on the defined scheduling policy and ensures that high-priority packets are scheduled preferentially.

Procedure

Choose Configuration > Security Services > QoS Configuration and click the Congestion Management tab.
Select a port to be configured. Perform the following operations as required in the port area:
- Click a port icon. To deselect the port, click the port icon again.
- Drag the cursor to select consecutive ports in a batch.
- Click multiple port icons to select these ports, and click a port icon again to deselect the port.
- Select a slot where a panel is located. All ports on the panel are selected.
Configure a queue scheduling mode on an interface in Scheduling method.
NOTE:
The S6720EI, S6720S-EI, S5720HI, S5730HI, S6720HI, and S5720EI do not support creation of scheduling templates.
1. Select Create Template from the drop-down list box.
2. Enter the name of the scheduling template in Create a Scheduling Template.
3. Select a scheduling mode of an interface queue.
  - pps: indicates WRR scheduling.
  - bps: indicates WDRR scheduling.
4. Set the weight of each queue.
  NOTE:
  If the weight of a queue is set to 0, the queue uses PQ scheduling. In this case, PQ+WRR or PQ+WDRR is used.
Click Apply.