AP Group

Procedure

• Create an AP group.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click Create. Set the parameters in Table 1.

     Table 1 Parameters for creating an AP group

     Parameter	Description
     AP group name	Name of the AP group
     Copy parameters from other groups	Copy configuration parameters from other AP groups to the current AP group.

  3. Click OK.
• Delete an AP group.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Select the AP group that you want to delete and click Delete.
  3. Click OK.
• Bind profiles to the AP group.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click an AP group name. On the AP group configuration page that is displayed, you can see the configurations of the AP group. See Profile for descriptions of the configuration profiles and Table 2 for details about the configuration parameters.

     Table 2 Configuration parameters of an AP group

     Parameter	Description
     VAP Configuration	Configures VAPs for AP groups: adds or removes VAP profiles for AP groups. After a VAP profile is added, the AP generates a VAP to implement basic WLAN services. For detailed parameters, see Wireless Service.
     Radio Management	Configures radio parameters for AP groups, enabling the radios to work at the optimal performance. Regulatory Domain Profile: configures the country code and DCA parameters for radios. Radio 0/Radio 1/Radio 2: configures parameters for radios. For detailed parameters, see Radio Management. Configure radios describes parameters on the Radio 0, Radio 1, and Radio 2 pages.
     AP	Configures system and interface parameters for AP groups. AP System Profile: configures system parameters for AP groups. STA Blacklist and Whitelist Profile. WMI Profile. AP Wired Port Settings: configures interface parameters for AP groups. ETH-TRUNK Profile: configures interface parameters for AP groups. For detailed profile parameters, see AP. See AP Wired Port Profile for parameters of the ETH, GE, ETH-TRUNK and MultiGE profiles. See STA Blacklist Profile and STA Whitelist Profile for parameters of the STA blacklist and whitelist profiles. See WMI Profile for parameters of the WMI profiles.
     Mesh	Configures the Mesh function for AP groups. Mesh Profile: adds or removes Mesh profiles for radios in AP groups. Mesh Whitelist Profile: adds or removes Mesh whitelist profiles for radios in AP groups. For detailed parameters, see Mesh.
     WDS	Configures the WDS function for AP groups. WDS Profile: adds or removes WDS profiles for radios in AP groups. WDS Whitelist Profile: adds or removes WDS whitelist profiles for radios in AP groups. For detailed parameters, see WDS.
     WIDS	Configures the WIDS function for AP groups. For detailed parameters, see WIDS.
     WLAN Location	Configures the location function for AP groups. For detailed parameters, see WLAN Location.
     Bluetooth Service	Configures the bluetooth function for AP groups. For detailed parameters, see Bluetooth Service.
     IoT	Configures the IoT function for AP groups. For detailed parameters, see IoT.

  3. Click Apply.
• Configure radios.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click an AP group name. The AP group configuration page is displayed.
  3. Click ahead of Radio Management. Among the displayed items, click Radio 0, Radio 1, or Radio 2. The radio configuration page is displayed. For detailed parameters, see Table 3.

     Table 3 Radio parameters

     Parameter	Description
     Radio 0 Settings (2.4G)/Radio 1 Settings (5G)/Radio 2 Settings (5G)
     Working status	Working status of all specified AP radios in an AP group.
     Working mode	Working mode of all specified AP radios in an AP group.
     Inter-Band Scanning	Inter-band scanning enabled after the monitoring mode is selected.
     Automatic power optimization	Automatic transmit power selection. Follow (global: ON): An AP automatically selects or adjusts the transmit power based on the WLAN radio environment, removing the need to specify AP power manually. OFF: The transmit power must be manually specified.
     EIRP (dBm)	Transmit power of a radio. NOTE: It can be configured only when Automatic power optimization is disabled.
     Automatic channel optimization	Automatic channel selection. Follow (global: ON): An AP automatically selects a proper channel based on the WLAN radio environment, removing the need to specify channels manually. OFF: Channels must be manually specified.
     Channel	Working bandwidth and working channel of the radio. NOTE: It can be configured only when Automatic channel optimization is disabled.
     Antenna gain (dB)	Antenna gain for all specified radios in an AP group.
     Coverage distance (0.1 km)	Radio coverage distance parameter for all specified radios in an AP group.
     Spectrum analysis	Whether spectrum analysis is enabled on a specified radio in an AP group.
     Switch to 5G	Whether the working frequency of a radio is switched to the 5 GHz frequency band. NOTE: Only radio 0 and radio 2 support this parameter.
     Redundant radio switchover	Global dual-frequency DCA. NOTE: It can be configured only when the 5 GHz frequency band is disabled.
     WIDS Control
     Device detection	Whether the device detection function is enabled on the radio.
     Containment of Rogue Devices	Whether rogue device containment is enabled.
     Attack detection type	Attack detection type. Multiple options can be selected. All: Enables all attack detection functions. Flood: Enables flood attack detection. Weak-IV: Enables weak IV attack detection. Spoof: Enables spoofing attack detection. WPA-PSK: Enables brute force attack detection for WPA-PSK authentication. WPA2-PSK: Enables brute force attack detection for WPA2-PSK authentication. WAPI-PSK: Enables brute force attack detection for WAPI-PSK authentication. WEP shared-key: Enables brute force attack detection for shared key authentication.
     Others
     Disabling CTS reply	Whether RUs are enabled to respond to STAs with CTS packets.
     CTS delay (us)	A delay for RUs to respond to STAs with CTS packets.
     Disabling Beacon frame transmission	Whether RUs are enabled to send Beacon frames.

  4. Click Apply.
• View the member list.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click View Member List and the member information is displayed.

• Move APs.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click View Member List and select the AP to be moved on the displayed member information page. Click Move AP, and the AP Group List page is displayed.

  3. Select an AP group and click OK. A message is displayed. Click OK again.