| RRM Profile |
Name of the RRM profile, which cannot be modified.
|
| Airtime fair scheduling |
Whether to enable airtime fair scheduling.
|
| Dynamic EDCA |
Whether to enable dynamic EDCA.
|
| Best Effort Service threshold(pps) |
Threshold for the dynamic EDCA Best-Effort service. |
| Multimedia air interface optimization |
Whether to enable the multimedia air interface optimization
function. |
| Voice message threshold (pps) |
Threshold of voice user packets. This parameter is configurable
only when Multimedia air interface optimization is set to ON.
|
| Video message threshold (pps) |
Threshold of video user packets. This parameter is configurable
only when Multimedia air interface optimization is set to ON.
|
| DFS channel switchback delay(min) |
Delay in switching back the DFS channel. The default value
is 0.
The value 0 indicates that the channel is switched back
immediately when the aging time expires. Other values indicate that
the channel is switched back after the specified delays.
|
| Upper calibration power threshold (dBm) |
Maximum transmit power that can be adjusted through radio
calibration.
|
| Lower calibration power threshold (dBm) |
Minimum transmit power that can be adjusted through radio
calibration.
|
| Calibration TPC threshold (dBm) |
Transmit Power Control (TPC) coverage threshold.
|
| High-density AMC optimization |
Whether to enable Adaptive Modulation and Coding (AMC) optimization
function in high-density scenarios. |
| Air Interface Deterioration
Indicator |
| Collision threshold (%) |
Collision threshold for triggering calibration.
|
| Noise floor threshold (dBm) |
Noise floor threshold for triggering calibration.
|
| UAC |
| UAC policy |
User CAC policy.
|
| New user count threshold |
CAC threshold for new users based on the user quantity.
This parameter is configurable only when UAC policy is set to User-based.
|
| Roaming user count threshold |
CAC threshold for roaming users based on the user quantity.
This parameter is configurable only when UAC policy is set to User-based.
|
| New user channel usage threshold (%) |
CAC threshold for new users based on the channel usage.
This parameter is configurable only when UAC policy is set to Channel usage-based.
|
| Roaming user channel usage threshold (%) |
CAC threshold for roaming users based on the channel usage.
This parameter is configurable only when UAC policy is set to Channel usage-based.
|
| Action upon reaching the access threshold |
Action to take for controlling access of new STAs when the
number of access STAs reaches the specified threshold.
This
parameter is configurable only when UAC policy is set to User-based or Channel
usage-based.
|
| Restrict access of weak-signal STAs |
Whether to restrict access from weak-signal STAs.
|
| SNR threshold (dB) |
Threshold for rejecting access from weak-signal STAs.
|
| Band Steering |
| Start threshold for load balancing between frequencies |
Start threshold for load balancing between two radios on
the AP that has band steering enabled.
|
| Load difference threshold for load balancing between frequencies
(%) |
Load difference threshold for load balancing between two
radios on the AP that has band steering enabled.
|
| Start SNR threshold for inter-frequency load balancing (dB) |
Start SNR threshold for load balancing between two radios
on the AP that has band steering enabled.
|
| Maximum number of rejections |
Maximum number of times an AP rejects association requests
of a STA through band steering.
|
| Probe count for aging STA frequency band |
Number of times an AP continuously receives probe frames
from the same frequency band.
|
| Dynamic Load Balancing |
| Load balancing |
Whether to enable load balancing. |
| Maximum number of rejections |
Maximum number of times an AP rejects association requests
of a STA for dynamic load balancing.
|
| Mode |
Dynamic load balancing mode, which can be based on the number
of STAs or the channel utilization.
|
| Start threshold for load balancing (STA count) |
Start threshold for dynamic load balancing based on the
number of STAs.
|
| Load difference threshold for load balancing |
Load difference threshold for dynamic load balancing.
|
| Start threshold for load balancing |
Start threshold for dynamic load balancing based on the
channel utilization.
|
| Smart Roaming |
| Smart roaming |
Whether to enable smart roaming. |
| Check roaming threshold |
Trigger mode of smart roaming, which can be check SNR or check
rate. |
| SNR threshold (dB) |
SNR-based roaming threshold.
|
| Rate percentage threshold (%) |
Rate-based roaming threshold.
|
| Upper threshold of roaming SNR difference (dB) |
Upper threshold for triggering STA roaming.
|
| Lower threshold of roaming SNR difference (dB) |
Lower threshold for triggering STA roaming.
|
| Aging time of "unable to roam" record (min) |
Aging time of "unable to roam" record of smart roaming STAs.
|
| Forcibly Disconnecting STAs |
| Forcibly disconnecting STAs |
Whether to forcibly disconnect STAs. |
| SNR threshold (dB) |
SNR threshold for forcing low-signal users offline.
|
| Rate percentage threshold (%) |
Rate percentage for forcing low-signal users offline
|
| SFN |
| Upper STA RSSI threshold (dBm) |
Upper RSSI threshold for agile distributed SFN roaming. |
| Lower STA RSSI threshold (dBm) |
Lower RSSI threshold for agile distributed SFN roaming. |
| Cumulative RSSI change threshold (dB) |
Cumulative RSSI change threshold for agile distributed SFN
roaming. |
| Number of STA holding times |
Number of STA holding times for agile distributed SFN roaming. |
| RSSI gap (dB) |
RSSI gap for agile distributed SFN roaming RUs. |
| Number of higher RSSI times |
Number of times the RSSI of agile distributed SFN roaming RUs
is higher than that of the local RU. |
| Roaming decision period (ms) |
Decision period for agile distributed SFN roaming. |
| RSSI report interval (ms) |
Interval for RUs to report the STA RSSI. |
NOTE: