OUI Configuration

Context

An OUI can be preset. The OUI is the first 24 bits of a MAC address. The Institute of Electrical and Electronics Engineers (IEEE) assigns an OUI to each vendor, and you can identify the vendor of a device based on the OUI. You can set the mask of the OUI on the switch to adjust the length of the MAC address that the switch matches with the OUI.

Procedure

Create an OUI.

Choose Configuration > Advanced Services > Voice VLAN > OUI Configuration to access the OUI Configuration page.

Click Create.

Table 1 describes the parameters on the OUI Configuration page.

**Table 1** Description of parameters on the **OUI Configuration** page
Parameter	Description
OUI	This parameter is mandatory. It specifies the MAC address of voice packets, for example, 00e0-fc12-3456.
Mask	This parameter is mandatory. Enter the mask, for example, ffff-ffff-ffff.
Description	Enter the description of the OUI.

Set parameters.
Click .

After the OUI configuration is complete, you can modify the description of the OUI.

Delete an OUI.
1. Choose Configuration > Advanced Services > Voice VLAN > OUI Configuration to access the OUI Configuration page.
2. Select data to be deleted and click Delete. The system asks you whether to delete data.
3. Click OK.
Refresh an OUI.
1. Choose Configuration > Advanced Services > Voice VLAN > OUI Configuration to access the OUI Configuration page.
2. Select data to be refreshed and click Refresh.