To implement intelligent operations and maintenance (O&M), enable a switch to periodically send performance data to iMaster NCE-CampusInsight, including interface traffic statistics, CPU or memory data, optical module information, and monitoring information about audio and video streams. iMaster NCE-CampusInsight processes received performance data, analyzes fault causes, and provides troubleshooting suggestions. It also completes health status check for the network, applications, and services, as well as implements fault pre-processing.
Table 1 describes the parameters for configuring SMI.
Parameter |
Description |
|---|---|
Source IP address |
IPv4 address used by the switch to communicate with the NMS. |
Server address |
IPv4 address of connected iMaster NCE-CampusInsight. |
Port |
Port number of connected iMaster NCE-CampusInsight. |
Report interval (s) |
Interval at which the switch reports KPI information to iMaster NCE-CampusInsight. |
Maximum size of data reported at one time (KB) |
Maximum size of packets sent by the switch to report KPI information to iMaster NCE-CampusInsight. |
Heartbeat time (min) |
Interval at which the switch and iMaster NCE-CampusInsight send heartbeat packets to each other. |
Server reconnection interval (min) |
Interval at which the switch reconnects to iMaster NCE-CampusInsight after port disconnection for the first time. |
Number of reconnection attempts |
Maximum number of attempts the switch reconnects to iMaster NCE-CampusInsight after port disconnection for the first time. |
Reported monitoring data |
Reported monitoring data sent by the switch to iMaster NCE-CampusInsight. |
Interval for reporting Device-data monitoring data (min) |
Interval for reporting device data to iMaster NCE-CampusInsight. This parameter can be configured only when Reported monitoring data is set to Device-data. |
Interval for reporting Fiber-module monitoring data (min) |
Interval for reporting optical module information to iMaster NCE-CampusInsight. This parameter can be configured only when Reported monitoring data is set to Fiber-module. |
Interval for reporting Device-status monitoring data (min) |
Interval for reporting device status information to iMaster NCE-CampusInsight. This parameter can be configured only when Reported monitoring data is set to Device-status. |
Interval for reporting poe monitoring data (min) |
Interval for reporting PoE data to iMaster NCE-CampusInsight. This parameter can be configured only when Reported monitoring data is set to PoE. |
Interval for reporting User-data monitoring data (min) |
Interval for reporting wired user data to iMaster NCE-CampusInsight. This parameter can be configured only when Reported monitoring data is set to User-data. |