Spectrum Analysis

Context

Spectrum analysis is not supported on the following APs.

AirEngine 5761-10W, AirEngine 5761S-10W, AirEngine 5761-10WD
AirEngine x762

On the Spectrum Analysis page, you can enable or disable the spectrum analysis function on a radio and view spectrum charts. The Spectrum Analysis page can display eight types of spectrum charts, including Swept Spectrogram, Active Devices, Real-Time FFT, Channel Metrics, Channel Quality Trend, FFT Duty Cycle, Interference Power, and Quality Spectrogram.

Procedure

Enable spectrum analysis on a radio and view spectrum charts.

Choose Monitoring > Wireless Service > Spectrum Analysis. The Radio List page is displayed.

**Table 1** Parameters on the **Radio List** page
Parameter	Description
AP Name	AP name.
AP ID	AP ID.
Radio ID	Radio ID of an AP.
Working Mode	Working mode of a radio.
Frequency Band	Frequency band on which a radio works.
STA HT Mode	Radio type.
Channel	Working channel of a radio.
Frequency Bandwidth	Channel bandwidth of a radio.
EIRP/Max EIRP	Radio power configured/Maximum power in compliance with local laws and regulations.
Downlink Packet Loss Ratio	Packet loss ratio on a radio.
Status	Whether to enable the spectrum analysis function on a radio.
Operation	Radio spectrum chart display by clicking View Drawing.

Select an AP and click Start.
In the AP radio list, click View Drawing in the Operation column. The related spectrum charts are displayed. A maximum of four spectrum charts can be displayed.
Select your desired spectrum chart from the drop-down list box in the upper left corner. Particularly, you can select Lower or Upper on the spectrum charts of a 5G radio to view spectrum charts of different frequencies.
On the Swept Spectrogram chart, set the signal strength scope at both ends of the color bar, and click Apply.

On the Active Devices chart, select Active Devices from the drop-down list box to display the detected non-Wi-Fi devices in a pie chart. Alternatively, select Active Devices (Table) to display these devices in a list.

**Table 2** Parameters in the non-Wi-Fi device list
Parameter	Description
Device Type	Type of the detected non-Wi-Fi device.
Signal	RSSI of the non-Wi-Fi device.
Duty Cycle	Duty cycle of the non-Wi-Fi device.
First Time	Time when the non-Wi-Fi device is detected.
Activity Duration	Time when the non-Wi-Fi device is activated.
Channel Affected	Channel interfered by the non-Wi-Fi device.
Center Frequency	Center frequency of the non-Wi-Fi device.
Bandwidth	Bandwidth of the non-Wi-Fi device.

Disable spectrum analysis on a radio.
1. Choose Monitoring > Wireless Service > Spectrum Analysis. The Radio List page is displayed.
2. Select an AP and click Stop.