AP Group

Procedure

• Create an AP group.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click Create. Set the parameters in Table 1.

     Table 1 Parameters for creating an AP group

     Parameter	Description
     AP group name	Name of the AP group
     Copy parameters from other groups	Copy configuration parameters from other AP groups to the current AP group.

  3. Click OK.
• Delete an AP group.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Select the AP group that you want to delete and click Delete.
  3. Click OK.
• Bind profiles to the AP group.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click an AP group name. On the AP group configuration page that is displayed, you can see the configurations of the AP group. See Profile for descriptions of the configuration profiles and Table 2 for details about the configuration parameters.

     Table 2 Configuration parameters of an AP group

     Parameter	Description
     VAP Configuration	Configures VAPs for AP groups: adds or removes VAP profiles for AP groups. After a VAP profile is added, the AP generates a VAP to implement basic WLAN services. For detailed parameters, see Wireless Service.
     Radio Management	Configures radio parameters for AP groups, enabling the radios to work at the optimal performance. Regulatory Domain Profile: configures the country code and DCA parameters for radios. Radio 0/Radio 1/Radio 2: configures parameters for radios. For detailed parameters, see Radio Management. Configure radios describes parameters on the Radio 0, Radio 1, and Radio 2 pages.
     AP	Configures system and interface parameters for AP groups. AP System Profile: configures system parameters for AP groups. AP Wired Port Settings: configures interface parameters for AP groups. ETH-TRUNK Profile: configures interface parameters for AP groups. For detailed profile parameters, see AP. See AP Wired Port Profile for parameters of the ETH, GE, ETH-TRUNK and MultiGE profiles.
     Mesh	Configures the Mesh function for AP groups. Mesh Profile: adds or removes Mesh profiles for radios in AP groups. Mesh Whitelist Profile: adds or removes Mesh whitelist profiles for radios in AP groups. For detailed parameters, see Mesh.
     WDS	Configures the WDS function for AP groups. WDS Profile: adds or removes WDS profiles for radios in AP groups. WDS Whitelist Profile: adds or removes WDS whitelist profiles for radios in AP groups. For detailed parameters, see WDS.
     WIDS	Configures the WIDS function for AP groups. For detailed parameters, see WIDS.
     WLAN Location	Configures the location function for AP groups. For detailed parameters, see WLAN Location.

  3. Click Apply.
• Configure radios.
  1. Choose Configuration > Wireless Services > AP Group > AP Group. The AP Group page is displayed.
  2. Click an AP group name. The AP group configuration page is displayed.
  3. Click ahead of Radio Management. Among the displayed items, click Radio 0, Radio 1, or Radio 2. The radio configuration page is displayed. For detailed parameters, see Table 3.

     Table 3 Radio parameters

     Parameter	Description
     Radio 0 Settings (2.4G)/Radio 1 Settings (5G)/Radio 2 Settings (5G)
     Working status	Whether the radio is enabled or disabled.
     Working mode	Working mode of APs, which can be: normal monitor
     EIRP	Transmit power of a radio.
     Channel	Working bandwidth and working channel of the radio.
     Antenna gain	Antenna gain of the radio.
     Coverage distance	Radio coverage distance.
     Spectrum analysis	Whether spectrum analysis is enabled on the radio.
     Switch to 5G	Whether the working frequency of a radio is switched to the 5 GHz frequency band. Only radio 0 supports this parameter.
     WIDS Control
     Device detection	Whether the device detection function is enabled on the radio.
     Countermeasure of Unauthorized Devices	Whether rogue device containment is enabled.
     Attack detection type	Attack detection type. Multiple options can be selected.

  4. Click Apply.